DTF Transfer - Yarn Santa A (CM-SA009)

Elevate your apparel production with this DTF Transfer showcasing Yarn Santa A. Engineered with Direct-to-Film technology, it delivers vibrant color, strong fabric adhesion, and durable results across a wide range of apparel and craft projects. ✅ Available Sizes & Recommended Uses 9.5" x 11" – Large Hoodies, crewnecks, adult tees 6.9" x 8" – Medium Youth shirts, small adult tees, tote bags 5.2" x 6" – In-Between Chest prints, kids’ tees, tote corners 3.4" x 4" – Small Hat fronts, sleeves, pockets, small items 1.7" x 2" – Mini Hat fronts, sleeves, pockets, small items 🧵 DTF Transfer Details Full-color DTF print with crisp, detailed artwork Printed on clear film for easy alignment Soft-hand feel with strong durability Works beautifully on cotton, polyester, and blended fabrics No minimums — ready to press Printed & shipped from New York by Get Things Printed DTF transfer only — apparel not included. 🔥 PRESS GUIDE (Updated for 2025) Before You Press: Temp: 290°F If using a thin silicone mat, increase +15°F to +20°F (max 335°F) Pre-press garment for 3–5 seconds Place transfer ink side down / film side up 1️⃣ FIRST PRESS – 12 Seconds 290°F | Medium–firm pressure Use parchment or Teflon Press 12 seconds ⚡ HOT PEEL immediately — smooth & low If lifting happens → re-press 3–5 seconds 2️⃣ SECOND PRESS – 5 Seconds (VERY IMPORTANT) Same temp Cover with parchment, old shirt, or thin silicone mat Press 5 seconds Improves wash life & softens finish 🧼 Wash & Care Wait 24 hours before washing Wash cold, inside-out, gentle cycle Hang dry or tumble low Do not iron directly on the print