DTF Transfer – GJ Cow Girl Boots Multi Sizes

This DTF transfer showcases the Cow Girl Boots design using advanced direct-to-film printing technology, delivering exceptional color vibrancy and fine detail reproduction across cotton, cotton blends, and polyester substrates. Available in multiple sizes, each transfer comes pre-cut and ready for application—simply position on your garment and heat-set to activate. The resulting prints exhibit remarkable durability, resisting fading, cracking, and wear through repeated laundering. DTF technology surpasses traditional screen printing in color saturation and photorealistic capability, making it ideal for custom apparel producers, branded merchandise, and time-sensitive projects requiring consistent, professional-grade results without compromise. ✅ Available Sizes & Recommended Uses 7.9" x 11" – Large Hoodies, crewnecks, adult tees 5.7" x 8" – Medium Youth shirts, small adult tees, tote bags 4.3" x 6" – In-Between Chest prints, kids’ tees, tote corners 2.9" x 4.0" – Small Hat fronts, sleeves, pockets, small items 1.4" x 2.0" – Mini Hat fronts, sleeves, pockets, small items Choose the perfect size to match any project. 🧵 DTF Transfer Details Full-color DTF print with crisp white underbase Printed on clear film for fast, easy alignment Soft-hand feel with durable, stretch-resistant finish Works on cotton, polyester, and blended fabrics No setup fees • No minimums Printed & shipped from New York by Get Things Printed 🔥 PRESS GUIDE (Updated for 2025) Before You Press: Temp: 290°F If using a thin silicone mat, increase +15°F to +20°F (max 335°F) Pre-press garment 3–5 sec Position transfer ink side down / film side up 1️⃣ FIRST PRESS – 12 Seconds 290°F | Medium–firm pressure Cover with parchment or Teflon Press 12 sec ⚡ Hot Peel — peel immediately, low and smooth If an edge lifts, re-press 3–5 sec 2️⃣ SECOND PRESS – 5 Seconds (Very Important) Same temp (290°F or adjusted) Cover with old shirt, parchment, or thin silicone mat Press 5 sec to improve durability + wash life 🧼 Wash & Care Wait 24 hrs before washing Wash cold, inside-out, gentle Hang dry or tumble low Do not iron directly on print 🚨 Troubleshooting Edges lifting → re-press 3–5 sec Shiny finish → use parchment or shirt for second press Not bonding → temp too low OR silicone mat needs +15–20°F increase   Tag us to be featured!