DTF Gang Sheets

EMAIL ARTWORK TO DORTHYLYNN@GMAIL.COM INCLUDING YOUR ORDER NUMBER PLEASE TRIM AROUND IMAGES Customs Information: I am NOT responsible for operator error, if you are concerned with the first ones you do, I recommend ordering a couple extra. We recommend heating your press to 300-325° F depending on your press. We recommend starting with a lower temp and going to a higher temp if needed. Press the shirt or material before adding the transfer to remove moisture. Lay the transfer down flat with the design facing the material. Press the transfer for 10 seconds. COLD PEEL. Cover the design with a Teflon sheet. Press for 10 more seconds. ~If the transfer is having trouble sticking we recommend pressing for 2-3 more seconds. if you need help with troubleshooting, please reach out via email at dorthylynn@gmail.com All custom DTF (Direct To Film) prints are printed using CMYK (Cyan, Magenta, Yellow, and Key) colors. This means four ink plates are used in your design and is matched as closely as possible to the CMYK color model. We saturate designs as much as possible to match the file that is sent. YOUR FILE COLORS WILL NOT EXACTLY MATCH THE COMPLETED DTF TRANSFER COLORS. We do our absolute best to get colors as close as possible, but a file on a computer is going to look different than a direct to film transfer using water-based ink. NO REFUNDS WILL BE GIVEN DUE TO COLOR VARIATIONS BETWEEN THE COMPUTER FILE AND THE CMYK PRINTED WATER-BASED INK DIRECT TO FILM TRANSFER. WE DO OFFER ARTWORK SERVICES FOR AN ADDITIONAL FEE. Files accepted: -png with transparent background   THERE ARE NO REFUNDS ON CUSTOMS. WE PRINT THE ARTWORK YOU PROVIDE. WE WILL REACH OUT IF WE SEE ANY ISSUES.   $5 FEE PER PRINT IF THE IMAGES DO NOT HAVE A TRANSPARENT BACKGROUND AND HAVE TO BE TAKEN OUT MANUALLY BY US! Please send us your work before placing your order to ensure the best print and quality. Not all art is DTF-friendly. This will prevent a lot of hassle, and if your artwork is below DTF standards, we can offer our assistance. BAD ART = UNEXPECTED RESULTS! EVERYTHING WILL BE PRINTED AS IS! WE PRINT ONLY WHAT YOU SEND! MULTIPLE IMAGE ORDERS Multiple image orders may delay your order as it requires more setup time. → ARTWORK REQUIREMENTS ← *** Our DTF Prints are done using a CMYK color mode. Colors may vary with Neon, Fluorescents, Metallics, etc.*** ***ART SHOULD BE CROPPED WITH NO EXTRA SPACE AROUND THE IMAGE*** • File types: PNG & JPEG ONLY. • Resolution: 300 DPI is highly recommended for non-vector files. • Transparent backgrounds are required! Sharp clean edges! • No screenshots, or downloads from social media/google (these only look good on your screen.) • Artwork must be sized to print according to transfer sheet size selection. • Do NOT mirror your artwork, our team will handle that.