Drinking Buddy Elf WiperTag

Celebrate the holidays with your favorite drinking Buddy, holding a beer in hand and cigarette in mouth. Universal size fits all rear wipers.  Both the WiperTag arm and window decal are repositionable and cleanly removable. Both are UV protected against fading.  The window decal is also laminated for additional protection.  Also works on wipers mounted on the top (character is upside down). Approximate measurements: WiperTag Arm measures  7.5" L x 3.2" W Elf Window Decal measures 10" W x 9.5" H Simple installation: Clean and dry rear window and wiper thoroughly Attach waving arm to wiper according to the instructions on packaging.  You will be able to adjust slightly left or right as necessary. Before removing back of decal, align to the correct side of the wiper for positioning. The elf decal should attach to the right since he's waving his right arm.  If needed, you can trim the decal to fit around the wiper arm if yours is mounted through the window.   Remove decal backing, align level with minimal touching on the adhesive, and from the bottom up gently lay the decal on the window pushing out any wrinkles on the way up.  Remove and realign if needed.  Save the paper backing if you want to reuse each season.   Follow up by using a credit card or something thin and flexible to push any wrinkles or bubbles towards the outside of the decal. To get the most from your decal, keep your wiper blades free of dirt and debris.  Remove the WiperTag arm before entering a car wash.   To remove the decal, make sure it is not freezing or it could tear. Remove indoors or warm with a blow dryer. Make sure your hands, window, and decal are clean and dry.  Simply pick off an edge and slowly peel off, then apply back to the original paper.  Remove WiperTag arm by tilting sideways and unlocking.  The number of times the decal can be reused varies depending on well it is taken care of.  *Character will upside down with wipers mounted on the top of the window.   Wipers mounted below the window may not create the same desired effect.  Please check with your local and state laws regarding window decals and exterior accessories prior to ordering.       MADE IN USA!  WiperTags are FUN, creative, durable covers which attach to rear vehicle wipers.    Available in many universal sizes, they're made to fit 99% of all rear vehicle wipers.  Refer to our FAQs for additional info. Made with 100% UV-protected materials to help prevent fading, cracking, and peeling. Designed for year-round weather conditions, including sun, rain, sleet, and snow. Detachable and interchangeable with hundreds of other designs. Also attach to bumpers, tailgates, or any smooth surface. Window decals are laminated and UV protected with an easy peel removable backing to prevent sticky adhesive left on your vehicle (If applicable*) WiperTags can be made into just about any design, customized for organizations for fundraising, branding, and promotions.  Learn more about custom designs.    *Note: This design is not associated with or licensed with the Elf movie