Protimeter SurveyMaster Moisture Meter

Built for water damage restoration and remediation professionals, the Protimeter SurveyMaster Moisture Detector searches for moisture in various building materials, including drywall, wood, siding, tile, insulation, carpeting, and even fiberglass boat hulls. Designed with two detection technologies in one, this noninvasive meter can find moisture with pinpoint accuracy or scan larger areas for accurate mapping. It's easy to hold and operate, making it a user-friendly device. Upgraded Model  The upgraded Protimeter SurveyMaster now has a larger display for easy reading, an automatic calibration check every 50 power cycles, and a battery life that is now three times longer than previous models.  Two Detection Types Use the Protimeter Moisture Meter’s pin mode to test for moisture in materials like drywall or wood or to determine whether a stain on a ceiling is still retaining moisture or has been repaired. Two sharp pins penetrate surfaces a maximum of 0.4 inches. An electrical current passes between the 2 pins, and the amount of resistance is relayed to you as a moisture reading. This sensor is also equipped with a search mode for a quick survey of the moisture level in walls and floors or to determine if there are areas that may require further investigation. It's great for areas like wallpaper where inserting pins isn’t practical; it emits electromagnetic signals to measure moisture content up to 0.75 inches below the surface. Optional Thermal Survey Kit  Choose the optional Protimeter Thermal Survey Kit for a package containing the SurveyMaster moisture meter plus a SEEK Shot Pro Thermal Camera. This kit is the ultimate moisture detection kit for building water damage inspections. The SEEK Shot Pro is an advanced thermal imaging camera that allows professionals to photograph structures and identify problem areas on the spot. The SEEK Shot Pro has a 320 X 240 Thermal Sensor with a 57-degree field view. This sensor captures clear, high-resolution images that allow you to diagnose problems accurately.  Track Changes Over Time The Protimeter SurveyMaster Moisture Meter has a reference mode in both measurement types. This mode helps determine whether remediation actions have been successful. Original moisture level readings are stored, and subsequent readings are displayed below the original to see whether levels are above or below the original point. User Friendly Designed for maximum usability, this Protimeter meter was engineered to be one of the most easy-to-use moisture sensors available. Durable Construction: It's constructed with rugged, durable materials to withstand the rigors of restoration site use. Lightweight: At just 8 ounces, it can be comfortably held in the hand and has a handy wrist strap. Easy to Read: Its backlit display provides easy-to-see moisture readings. Additional Features Touch Buttons: Unit power and modes are easily changed by pressing the large touch buttons. Programmable Settings: You can set your desired dry, wet, and at-risk settings. When moisture levels exceed your preset settings, a buzzer will sound. Automatic Shut Off: To save battery life, the detector can be programmed to automatically shut off after 1 to 6 minutes if no key press has been detected. Low Battery Notification: This feature lets you know when to replace the 9-volt battery. Sylvane’s Expert Take Restoration professionals can safely detect moisture on various surfaces with the Protimeter SurveyMaster Moisture Meter. Two-in-One Moisture Detection: Features pin mode for precisely detecting moisture in wood or flooring and search mode for less invasive moisture readings. Built to Last: With durable materials and construction, it’s built to withstand constant use on job sites. Sharp Pins: Users should remember that the auxiliary pins are very sharp. The pins can be safely covered with the attached pin cap when not used.