DPU90 Lec770 Reversible Vibratory Plate

DPU90 Lec770 Reversible Vibratory Plate 5100028357Categories Compaction ,Vibratory Plates ,Reversible Vibratory Plates ,Product DetalisIntuitive control handle, direction change by moving the handle forward and backwardCenter pole height is adjustable without toolsLow hand-arm vibrations, below 2.5 m/s2 allows for 8 hours of application by the same operatorLow overall height for compact working and transport dimensionsCenter pole quick lowering for passing below obstacles, direct reset to previous operator positionSturdy, two-piece steel frame hood, lockableFold-down lifting eye, optimally shaped for using various tackleStart at the push of a button, automatic start after the warm-up phase prevents a cold start that stresses the machineOperator's panel, 12 languages available: Electronic operating displays, diagnostic menu, including for battery voltage, engine speed, coolant temperature, error memoryCompatec: Easy to understand display for compaction control with 8 LEDs, incl. machine protection sensor, which protects the machine from overload when driving on hard sub-surface. Programmable behavior: Warning flashing, RPM reduction or shutdown of the machineMachine protection sensor protects the machine from overload when driving on hard sub-surface. Programmable behavior: Warning flashing, RPM reduction or shutdown of the machineProgrammable anti-theft PINHood can be opened without tools by swinging open, offers quick and spacious access to all controlLarge air filter for long service life Large tank, fill level can be seen from outsideFour large tie-downs on the base plate, very easily accessible, even from outside of the loading area ENVIRONMENT DATA-1 Storage temperature range : -20 - 50 C Sound level LpA : 94,0 dB(A) Sound level LpA (Standard) : EN 500-4 Operating temperature range : -10 - 50 C Uncertainty in measurement HAV : 0,5 m/s2 Sound power LWA, measured : 108,0 dB(A) Sound power LWA, guaranteed : 109,0 dB(A) Sound power LWA (Standard) : EN 500-4 HAV summation (Standard) : EN 500-4 HAV summation (average value) : 2,5 m/s2 ENVIRONMENT DATA-2 Storage temperature range : -4 - 122 F Sound level LpA : 94,0 dB(A) Sound level LpA (Standard) : EN 500-4 Operating temperature range : 14 - 122 F Uncertainty in measurement HAV : 1,6 ft/s2 Sound power LWA, measured : 108,0 dB(A) Sound power LWA, guaranteed : 109,0 dB(A) HAV summation (average value) : 8,2 ft/s2 Sound power LWA (Standard) : EN 500-4, 2000/14/EG HAV summation (Standard) : EN 500-4 MECHANICAL - OUTPUT DETAILS-1 Vibrations : 3.780 1/min Vibrations (Hz) : 63 Hz Centrifugal force : 90,000 kN Area capacity : 1.386 m2/h Forward Running : 30,00 m/min Gradeability : 34,0 % Transmission : ELHY MECHANICAL - OUTPUT DETAILS-2 Vibrations : 3.780 1/min Vibrations (Hz) : 63 Hz Centrifugal force : 20.233 lbf Area capacity : 14.918,9 ft2/h Forward Running : 1,6 fps Gradeability : 34,0 % Transmission : ELHY Engine-1 Cooling : water-cooling Engine type : Diesel engine Engine operating mode : four-stroke Fuel : Diesel EN 590 Cylinder : 2 Cylinder capacity : 686 cm3 Tank capacity : 7,20 l Oil filling max. : 1,60 l Power rating max. : 11,7 KW Engine speed (Power max.) : 3.600 1/min Standard (Operating power) : ISO 3046 IFN Operating Engine speed : 3.350 1/min Engine Manufacturer : Kohler Nominal Engine speed : 3.350 1/min Effective power : 10,7 KW Oil specification : SAE 10W-40 Standard (Effective power) : ISO 3046 IFN Standard (Power max.) : ISO 3046 IFN Operating power : 9,8 KW Oil filling min. : 1,60 l Upper idling speed ex load : 3.450 1/min Exhaust-gas limit : US:EPA4 final+Diretive97/68/EG Starter battery Voltage : 12 V Starter type : E-starter Oil volume incl. filter change : 1,60 l Air cleaner : dry air filter Battery capacity (nom. value) : 50 Ah Inclined position max. : 25,0 Fuel consumption-L/hr : 2,70 L/hr Fuel consumption 1.1 : 2,70 L/hr Engine-2 Engine type : four-stroke Engine operating mode : Diesel engine Fuel : Diesel EN 590 Cylinder : 2 Cylinder capacity : 41,9 Inch3 Tank capacity : 1,9 gal US Oil filling max. : 0,4 gal US Power rating max. : 15,7 hp Engine speed (Power max.) : 3.600 1/min Standard (Operating power) : ISO 3046 IFN Operating Engine speed : 3.350 1/min Engine Manufacturer : Kohler Nominal Engine speed : 3.350 1/min Effective power : 14,3 hp Cooling : water-cooling Inclined position max. : 25,0 Oil specification : SAE 10W-40 Standard (Effective power) : ISO 3046 IFN Upper idling speed ex load : 3.450 1/min Starter battery Voltage : 12 V Starter type : E-starter Exhaust-gas limit : US:EPA4 final+Diretive97/68/EG Oil volume incl. filter change : 0,4 gal US Air cleaner : dry air filter Battery capacity (nom. value) : 50 Ah Standard (Power max.) : ISO 3046 IFN Operating power : 13,1 hp Fuel consumption 2.2 : 0,7 GPH US Oil filling min : 0,4 gal US Fuel consumption 2.1 : 0,7 GPH US MECHANICAL DETAILS-1 Width : 770 mm Height : 1.541 mm Operating weight : 771,0 kg Length Drawbar in op. pos. : 2.409 mm Ground clearance : 830 mm MECHANICAL DETAILS-2 Width : 30,3 " Height : 60,7 " Operating weight : 1.699,8 lb Length Drawbar in op. pos. : 94,8 " Ground clearance : 32,7 " OPERATING FLUIDS-1 Tank capacity : 7,20 l Exciter oil volume : 1,35 l Hydraulic fluid type : Renolin MR 520 Exciter oil type : 75W-90 API GL-4 Cooling fluid volume : 3,30 l Cooling fluid type : SAE J1034:Wasser (1:1) Hydraulic fluid volume : 17,7 l OPERATING FLUIDS-2 Tank capacity : 1,9 gal US Cooling fluid type : SAE J1034:Wasser (1:1) Hydraulic fluid type : Renolin MR 520 Exciter oil volume : 1,43 qt US Exciter oil type : 75W-90 API GL-4 Cooling fluid volume : 3,5 qt US Hydraulic fluid volume : 18,7 qt US HYDRAULIC-1 Operating pressure hydraulics : 148,0 bar max. perm. hydraulic pressure : 230,0 bar HYDRAULIC-2 Operating pressure hydraulics : 2.146,0 psi max. perm. hydraulic pressure : 3.335,0 psi Comes With Vibratory plateOperator's manualMachine configuration instructions