DPU5545He Reversible Vibratory Plate

Powerful vibratory plate that also easily compacts heavy soils. Compatec: Easy to understand display for compaction control with 8 LEDs Intuitive control handle: Control of the direction of movement as well as the speed in the same movement sequence - without changing grip, both hands stay on the control handle Low hand-arm-vibrations (well below 2.5 m/s²) Height adjustable center pole Electric starter with a loud signal tone generator to avoid unnecessary battery discharge Safety setting: Machine moves away from the operator if the control handle is released Large-sized engine with high power reserves for a long service life Motor protection: Not possible to start with a low oil level Operating hour meter Thick, wear resistant base plate made from nodular cast iron The engine and tank are protected by a sturdy frame, which is also useful for a sturdy tie-down during transport. Very sturdy, free from play center pole lock, easy to actuate for a secure transport Large lifting eye that can be offset to neutral height All maintenance accesses are quick and easy to reach Self-adjusting V-belt and maintenance-free alternator Comprehensive protection of the functional parts against stone chipping and dirt accumulation Due to the low frequency, also suitable for the vibration of heavy interlocking paving stones Quick and easy assembly of a paving pad possible You will also find an appropriate paving pad here in the shop for the protection of paving stone bottoms.   DPU5545H DPU5545He DPU5545Heap DPU5545Hec Operating data  Operating weight  kg 399 424 447 426 Centrifugal force  kN 55 55 55 55 Base plate size (W x L) mm 440 x 900 440 x 900 440 x 900 440 x 900 Base plate thickness  mm 12 12 12 12 Height (without center pole) mm 790 790 790 790 Operating width (with extension plate) mm 600 600 750 600 Frequency  Hz 69 69 69 69 Hand-arm vibrations  m/s² < 2.5 < 2.5 < 2.5 < 2.5 Advance travel max. (dependent on soil and environmental influences) m/min 27 27 27 27 Surface capacity max. (dependent on soil and environmental influences) m²/h 980 980 980 980 Gradeability  % 57.7 57.7 57.7 57.7 Transport height  mm 1,514 1,514 1,514 1,514 Transport length  mm 1,048 1,048 1,048 1,048 Transport width  mm 780 780 810 780 Engine / Motor  Engine / Motor type  Air-cooled single cylinder four-cycle diesel engine Air-cooled single cylinder four-cycle diesel engine Air-cooled single cylinder four-cycle diesel engine Air-cooled single cylinder four-cycle diesel engine Engine / Motor manufacturer  Hatz Hatz Hatz Hatz Engine / Motor  1D42S 1D42S 1D42S 1D42S Displacement  cm³ 445 445 445 445 Engine performance max. (DIN ISO 3046 IFN) kW 7 7 7 7 at rpm  rpm 3,600 3,600 3,600 3,600 Operating performance (DIN ISO 3046 IFN) kW 4.9 4.9 4.9 4.9 at rpm  rpm 3,000 3,000 3,000 3,000 Fuel consumption  l/h 1.6 1.6 1.6 1.6 Fuel tank capacity  l 5 5 5 5 Power transmission  From the drive motor via centrifugal clutch and V-belt directly to the exciter. From the drive motor via centrifugal clutch and V-belt directly to the exciter. From the drive motor via centrifugal clutch and V-belt directly to the exciter. From the drive motor via centrifugal clutch and V-belt directly to the exciter. Fuel type  Diesel Diesel Diesel Diesel CO2 (NRSC) * g/kWh 993 993 993 993 *Determined value of the CO2 emission during engine certification without consideration of the application on the machine.