Doorking 9410-010 Single Channel Loop Detector

The DoorKing 9410-010 is a single-channel plug-in vehicle loop detector for DoorKing gate operators. It plugs into the loop detector port on the operator control board, so only the loop lead-in needs wiring. Self-tuning circuitry tracks loop drift and weather changes. Four frequency and four sensitivity settings. Sensitivity boost raises sensitivity once a vehicle is detected so high-bed vehicles are not lost. Fast-Trak, a loop fault monitor with a flashing LED, a frequency readout on the LED at power-up, and a reset button. Before You Order DoorKing lists the 9409, 9410 and 9411 plug-in detectors for its legacy operators. Check the operator manual for the correct detector. Loop not included. DoorKing preformed loops are 4 x 8 ft with 50 ft lead-in. Minimum loop size is 18 x 48 in. Detection height is about 1/2 to 2/3 of the short side. Twist lead-in wires 6 turns per foot. Set nearby loops to different frequencies. Low-power version for solar operators: 9416-010. Family: 9410-010 single channel, 9409-010 dual channel, 9411-010 single channel with aux relay.