DMX PowerPort 375

A versatile indoor power & data unit for Martin Creative LED From the Manufacturer: The DMX PowerPort 375’s versatile housing supports single- and dual-unit mounting in 19” racks, wall-mounting and truss-mounted hanging configurations. The robust connectors and built-in DMX/RDM compatible splitter facilitate easy daisy-chaining between units, while the local test-button provides quick system-check without running back to the console. Features: Rack-, truss- and wall-mountable Compact design DMX/RDM IN and THRU Built-in DMX/RDM splitter Hybrid power/data output port Local test button  Specifications: Physical Width: 220mm (single or double unit 19” rack-mountable with included rackmount ears) Height: 44mm (rack mount 1U) Depth: 289mm Weight: 2.33 kg Control and Programming Control Protocols: DMX and RDM DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 DMX/RDM Transceiver IN/THRU: Opto-Isolated RS-485 DMX/RDM Transceiver OUT: Opto-Isolated RS-485 Setting and Addressing of connected fixtures: RDM Firmware update: over DMX link using Martin Companion Construction Housing: Steel Color: Matte Black Protection rating: IP 20 Installation Orientation: Any Single Unit 19-inch Rackmount: Using supplied short and long rack mounting ears Dual Unit 19-inch Rackmount: Using supplied coupling plates and short rack mounting ears Wallmount: Using supplied short rack mounting ears Trussmount Vertical: Using half-coupler clamp in M10 threaded hole, max. bolt length 20 mm Trussmount Horizontal: Using halfcouplers in supplied short rack mounting ears Connections AC mains power IN: Neutrik powerCON TRUE1 AC mains power THRU: Neutrik powerCON TRUE1 DMX/RDM IN: Neutrik 5-pin male XLR socket DMX/RDM THRU: Neutrik 5-pin female XLR socket Combined power & data out: Neutrik 4-pin female XLR socket (All connections hot-plugging compatible) Electrical AC mains power input: 100-240 V (nominal), 50/60Hz Power supply unit: Auto-ranging electronic switch mode Maximum permitted total current draw from 48Vdc OUT at 100-120 V mains power: 5.0 A Maximum permitted total current draw from 48Vdc OUT at 173-240 V mains power: 7.5 A Mains fuses: Double-pole/neutral fusing, 2x T6.3 A (slow-blow), 250 VAC Maximum total power consumption: 450 W (including full load of connected fixtures) Typical half-cycle RMS inrush current at 230 V, 50 Hz: 9.6 A Typical earth-leakage current: 1.7 mA Thermal Cooling: Filtered forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 45 °C Minimum ambient temperature (Ta min.): -20 °C Typical heat dissipation (calculated, +/- 10%): 300 BTU/hr. (not including connected fixtures, but with system at full load) Environmental RoHS: Compliant REACH: Compliant Approvals EU safety: IEC/EN60950, IEC/EN62368-1 EU EMC: EN55032,EN55035, EN 61000-3-2, EN 61000-3-3 Australia/NZ: AS/NZS 62368.1:2018 Canadian / US Safety: CAN/CSA-C22.2 No. 62368-1/UL 62368-1 Canadian / US EMC: ICES-003,Class B / FCC 47 CRF § 15 Class B India: BIS What’s Included: 1 x Safety Cable Attachment Eyelet, incl. screws 2 x Short Rack Mounting Ears, incl. screws 1 x Long Rack Mounting Ear, incl. screws 1 x Coupling Plate, incl. screws User Manual (Please note that a power input cable is not supplied with the product and must be ordered separately.)