IMPs

IMMACULATE MARGINAL PROTECTION. IMP's let you take advantage of the smallest and most marginal placements. Nut heads are made of brass, allowing them to bite into small placements but making them strong enough to resist pulling through. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.IMP's are invaluable for those pushing into harder grades and need to take advantage of all protection options.        FEATURES Micro protection for small cracks As climbs become harder, the need to make the most of all available protection increases. Micro protection lets you protect cracks which normal sized pieces would not fit. Having these wires on your rack gives you more options. Wires soldered directly into heads for strength The wires of IMPS and Brass Offsets are soldered directly into their heads. This allows a thicker wire to be used, increasing the strength rating of each nut. Brass heads for optimal characteristics in marginal placements. The DMM protection range is colour coded for quick and easy size selection. Colours are co-ordinated across passive and active protection, for quick selection of alternatives if your first choice doesn't fit. Passive protection works in wet and icy conditions Passive protection works by jamming in constrictions to prevent falls. It is suitable for use in all conditions. Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced. Single / 1 A1721A Blue 4kN 4g EN12270:2013 UIAA 124 Single / 2 A1722A Red 5kN 8g EN12270:2013 UIAA 124 Single / 3 A1723A Silver 5kN 10g EN12270:2013 UIAA 124 Single / 4 A1724A Purple 7kN 13g EN12270:2013 UIAA 124 Single / 5 A1725A Green 7kN 16g EN12270:2013 UIAA 124