DJI O4 Air Unit

See even more with DJI O4 Air Unit. This VTX  has improved resolution, lower latency, and extended range. At just 8.2 grams, it integrates a 1/2-inch image sensor that records 4K/60fps video, delivering an ideal combination of performance and portability. And this Air Unit is ready for whoops & lightweight builds! Check out all of our HD VTX options and the rest of our DJI products! Features Works with DJI Goggles 2, DJI Goggles Integra, DJI Goggles 3, or DJI Goggles N3 Compatible with DJI FPV Remote Controller 2 or 3 Lightweight FHD FPV Digital Video Transmission 20 ms Low Latency, 10 km Range 1/2-inch CMOS Image Sensor 4K/60fps Video Recording 1080p/100fps Live View 8.2g Lightweight Body Lightweight Design The DJI O4 Air Unit can fit drone frames of 2 inches and smaller, supporting flexible assembly to suit various creative flight scenarios. Experience the thrill of flying while capturing high-quality footage with ease. Visually Striking The DJI O4 Air Unit Series is capable of recording 4K/60fps video. The video transmission system utilizes H.265 video encoding, supporting high-frame-rate transmission at 1080p/100fps, ensuring clear and smooth real-time imagery. No matter how fast you fly, the camera view keeps up. Racing Mode The DJI O4 introduces a new Racing mode, with video transmission latency as low as 20 milliseconds. It supports up to eight aircraft racing simultaneously, taking you on an exhilarating, high-speed journey through the skies. Canvas Mode The DJI O4 Air Unit supports Canvas Mode and Betaflight OSD settings. You can customize the real-time data and layout displayed on your goggles screen, making flight data clear at a glance and enhancing your control precision. Specifications DJI O4 AIR UNIT Weight: Air Unit (camera module excluded): Approx. 5.1 g Air Unit (camera module included): Approx. 8.2 g* Antenna: Approx. 0.75 g The lens mount is not included. With the lens mount, the weight is 9.2 grams. Dimensions: Transmission Module: 30×30×6 mm (L×W×H) Camera Module: 13.44×12.36×16.50 mm (L×W×H) Mounting Pattern: 25.5×25.5 mm Coaxial Cable: 50 mm 3-in-1 Cable: 50 mm Antenna: 80 mm VIDEO TRANSMISSION Operating Frequency: 5.170-5.250 GHz 5.725-5.850 GHz Operating frequency varies by region. Refer to local regulations. Transmitter Power (EIRP): 5.1 GHz: <23 dBm (CE) 5.8 GHz: <30 dBm (FCC) <14 dBm (CE) <30 dBm (SRRC) Lowest Latency: DJI Goggles 3 (Racing Mode): 20 ms with 1080p/100fps DJI Goggles N3 (Racing Mode): 24 ms with 1080p/100fps DJI Goggles 2 / Goggles Integra: Less than 35 ms with 1080p/100fps Latency data represents the minimum latency tested in open environments. Max Video Transmission Range: DJI Goggles 3 / DJI Goggles N3: FCC: 10 km CE: 6 km SRRC: 6 km Measured in unobstructed outdoor environments. The actual range varies based on flight endurance. Live View Quality: 1080p at 30/50/60/100fps Communication Bandwidth: Max 60 MHz Antenna: 1 antenna, 1T1R Channels: Auto Mode and Manual Mode Supported With DJI Goggles 3 or DJI Goggles N3: 60 MHz: 1 channel 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels With DJI Goggles 2 or Goggles Integra: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels Channel Info: FCC/SRRC/CE: 60 MHz / 40 MHz: Channel 1: 5794.5 MHz 20 MHz / 10 MHz: Channel 1: 5768.5 MHz Channel 2: 5789.5 MHz Channel 3: 5814.5 MHz CAMERA Image Sensor: 1/2-inch CMOS Sensor Lens: FOV: 117.6° Equivalent Focal Length: 14 mm Aperture: f/2.8 Focus: 0.6 m to ∞ ISO Range: 100-6400 (Auto) 100-12800 (Manual) Video Resolution: 4K (4:3): 3840×2880@30/50/60fps 4K (16:9): 3840×2160@30/50/60fps 1080p (4:3): 1440×1080@30/50/60/100/120fps 1080p (16:9): 1920×1080@30/50/60/100/120fps Video Format: MP4 Max Video Bitrate: 100 Mbps Color Mode: Normal Mode Camera FOV: Standard Wide-Angle EIS (Electronic Image Stabilization): RockSteady 3.0+ Stabilization function off (supports Gyroflow) When RockSteady is enabled, only the standard shooting angle is supported. HARDWARE Input Voltage: 3.7-13.2 V Operating Temperature: -10°C to 40°C STORAGE Built-in Storage: 23 GB Supported SD Cards: Not supported COMPATIBILITY Supported Flight Controller System: Betaflight 4.3.0 and higher Supported DJI Goggles and Remote Controllers: DJI Goggles 3 + DJI FPV Remote Controller 3 DJI Goggles N3 + DJI FPV Remote Controller 3 DJI Goggles 2 / Goggles Integra + DJI FPV Remote Controller 2 Flight control firmware must support the SBUS protocol to use the DJI FPV Remote Controller. DJI O4 ANTENNA Weight: Approx. 0.75g Length: 80 mm Downloads DJI O4 camera  adapter: Mounting plates from 14mm to 20mm. Utilizes the same hole positions as the previous DJI O3 air unit. Download and 3D print the DJI O4 Air Unit 20mm camera adapter plates here! Includes 1x DJI O4 Air Unit Transmission Module 1x DJI O4 Air Unit Camera Module 1x DJI O4 Air Unit 3-in-1 Cable 1x DJI O4 Air Unit Antenna Compatibility Chart