DJI Matrice 4TD with RC Plus 2 Enhanced Controller (Standalone Unit)

DJI Matrice 4TD with RC Plus 2 Enterprise Enhanced Controller: reliable thermal and high-resolution imaging drone platform The DJI Matrice 4TD is an enterprise-grade aerial platform designed for operations that demand visibility, endurance, and reliability in challenging environments. Built for public safety, infrastructure inspection, and remote monitoring, the Matrice 4TD integrates high-resolution visual imaging, thermal sensing, and advanced obstacle awareness into a single IP55-rated aircraft. This standalone configuration includes the RC Plus 2 Enhanced Controller, delivering a rugged control solution for field deployment where weather, terrain, and signal continuity cannot be compromised. Key features at a glance Triple 48 MP visual cameras support wide, medium, and telephoto inspection views. 640 × 512 thermal sensor enables infrared detection in low-visibility environments. Thermal video up to 1280 × 1024 at 30 fps with UHR enabled. Thermal still photos support Normal and UHR Infrared Image modes. Night Scene mode improves situational awareness during nighttime operations. Near-infrared auxiliary lighting supports visual clarity in dark conditions. Up to 47 minutes of maximum flight time supports extended missions. Wire detection identifies 12 mm obstacles at speeds up to 15 m/s. 80° upward gimbal tilt enables under-bridge and overhead structure inspection. IP55-rated airframe supports operation in rain, fog, and dust. How does the Matrice 4TD compare to the Matrice 4D and Matrice 4T? The DJI Matrice 4TD combines the thermal imaging capabilities of the Matrice 4T with the rugged, dock-ready airframe of the Matrice 4D. For teams evaluating the three platforms, the table below highlights the most important differences. Feature DJI Matrice 4TD DJI Matrice 4D DJI Matrice 4T Primary Use Thermal inspections, public safety, search and rescue, all-weather operations Mapping, surveying, infrastructure inspection, autonomous dock operations Portable thermal inspection and public safety missions Thermal Camera ✓ 640 × 512 thermal camera — ✓ 640 × 512 thermal camera Wide Camera 48 MP, 1/1.3" CMOS 20 MP, 4/3" CMOS, mechanical shutter 48 MP, 1/1.3" CMOS Medium Tele Camera 48 MP 48 MP 48 MP Tele Camera 48 MP 48 MP 48 MP Weather Protection ✓ IP55-rated ✓ IP55-rated No official IP rating Maximum Flight Time Up to 47 minutes Up to 54 minutes Up to 49 minutes 80° Upward Gimbal Tilt ✓ Supported ✓ Supported — Wire Detection ✓ Detects 12 mm wires at up to 15 m/s ✓ Detects 12 mm wires at up to 15 m/s Standard omnidirectional obstacle sensing DJI Dock 3 Compatible ✓ Yes ✓ Yes — Best For Teams needing thermal imaging plus all-weather and autonomous deployment capability Surveying and mapping teams needing a mechanical-shutter camera in an IP-rated platform Portable thermal inspections where weather sealing and dock integration are not required In short: The Matrice 4TD is the thermal-equipped member of the Matrice 4D Series. It combines the thermal imaging payload of the Matrice 4T with the IP55-rated, DJI Dock 3-compatible airframe, advanced wire-detection capability, and 80° upward gimbal tilt found on the Matrice 4D platform. Integrated multi-sensor imaging for low-visibility operations The Matrice 4TD integrates three 48 MP visual cameras with an infrared thermal camera to support observation across multiple distances and lighting conditions. The thermal system outputs 640 × 512 video at 30 fps under normal operation, with support for 1280 × 1024 video at 30 fps when the Ultra-High Resolution Infrared Image function is enabled and Night Scene mode is disabled. For still photography, the thermal camera supports both Normal Mode and UHR Infrared Image Mode, allowing operators to capture single or timed thermal images based on mission requirements. Endurance, safety, and mission reliability in harsh environments With up to 47 minutes of maximum flight time, the Matrice 4TD supports extended missions without frequent battery changes. Its obstacle sensing system is designed to detect wires as small as 12 mm while flying at speeds up to 15 m/s, supporting safer operation near utilities and infrastructure. The 80° upward gimbal tilt enables direct inspection of bridge undersides and overhead structures, while IP55 protection allows continued operation in rain, fog, and dusty conditions common in real-world deployments. Applications Public safety response: thermal and visual assessment during emergencies. Infrastructure inspection: powerlines, bridges, towers, and industrial assets. Search and rescue: heat detection and long-duration overwatch missions. Night operations: visual and thermal coverage after dark. Remote monitoring: reliable operation in weather-affected environments. Utility inspection: obstacle-aware flight near wires and structures. Disaster assessment: post-event damage evaluation in hazardous conditions. Perimeter security: long-endurance patrol and observation. Powerline and substation inspections with advanced LiDAR support Designed for enterprise reliability The Matrice 4TD is engineered to deliver consistent performance in environments where visibility, weather resistance, and flight safety are critical. Its integrated sensor suite reduces payload complexity while expanding mission capability. Combined with the RC Plus 2 Enhanced Controller and DJI’s enterprise transmission systems, the platform supports dependable deployment across demanding operational scenarios. The DJI Matrice 4TD with RC Plus 2 Enhanced Controller provides a mission-ready aerial solution for teams requiring thermal insight, telephoto reach, and all-weather reliability. Call or message Serious Detecting to talk through configuration and support before you order.