DJI Matrice 400 Third Gimbal Connector

⚠ Important Compatibility Notice This accessory is designed specifically for the DJI Matrice 400 aircraft. Compatible Aircraft: DJI Matrice 400 Connection: DJI E-Port V2 E3 or E4 port Maximum Payload: 3 kg with the quick-release mount or 6 kg with screw-lock fastening. The maximum payload depends on the mounting method and does not override the aircraft's overall payload limits. DJI Matrice 350 RTK and other aircraft are not listed as compatible. Install the connector only when the aircraft is powered off. Verify the payload, mounting method and connection requirements before ordering. DJI Enterprise Payload Mounting Accessory DJI Matrice 400 Third Gimbal Connector Expand the payload mounting options of the DJI Matrice 400 with a dedicated third gimbal connector designed for compatible enterprise payloads and specialized aerial operations. Expand Payload Mounting Flexibility The DJI Matrice 400 Third Gimbal Connector provides an additional mounting position on the underside of the aircraft. By connecting to the E3 or E4 port of the DJI E-Port V2, it enables compatible payloads to be mounted beneath the aircraft. The connector supports two mounting methods: a quick-release connection with a maximum payload of 3 kg, and screw-lock fastening with a maximum payload of 6 kg. Select the appropriate mounting method according to the payload design and the manufacturer's installation requirements. 🛠️ Additional Payload Mounting Adds a third gimbal mounting position beneath the DJI Matrice 400 for supported payload configurations. ⚙️ Two Mounting Methods Supports quick-release mounting up to 3 kg or screw-lock fastening up to 6 kg, subject to the applicable payload and aircraft limits. 🔌 E-Port V2 Connection Connects to the E3 or E4 port of the DJI E-Port V2 to support the designated mounting configuration. Compatibility Compatible Aircraft DJI Matrice 400 Required Connection DJI E-Port V2 — E3 or E4 Compatibility Warning DJI identifies the Matrice 400 as the compatible aircraft for this connector. Do not assume compatibility with the Matrice 350 RTK, Matrice 300 RTK or other aircraft. Confirm the payload interface and mounting requirements before purchase. Mounting Methods & Payload Limits Mounting Method Maximum Payload Important Consideration Quick-Release Mount 3 kg Follow the compatible payload's quick-release interface requirements. Screw-Lock Fastening 6 kg Follow the specified screw-lock mounting and payload installation requirements. The figures above are the connector's specified maximum payload limits for each mounting method. They are not a guarantee that every payload of the stated weight is compatible. Aircraft Payload Considerations The DJI Matrice 400 has a maximum payload capacity of 6 kg under the specified reference conditions. Actual allowable payload depends on the aircraft configuration and operating conditions. When using the single downward gimbal, dual downward gimbal and third gimbal connector simultaneously, DJI specifies that the combined weight of non-DJI payloads must not exceed 6 kg. Check the official aircraft manual and payload manufacturer's installation guidance before flight. Specifications Product Name DJI Matrice 400 Third Gimbal Connector Model Number M400 TGC Compatible Aircraft DJI Matrice 400 Connection Port DJI E-Port V2 E3 or E4 Maximum Payload 3 kg for quick-release mounting; 6 kg for screw-lock fastening Dimensions 133 × 91 × 39 mm Weight 184 g Waterproof Rating Depends on the attached payload; refer to IEC 60529 and the relevant product documentation. In the Box ✓ DJI Matrice 400 Third Gimbal Connector × 1 ✓ M3 Screw × 4 Installation & Safety Notes Always power off the aircraft before installing or removing the third gimbal connector. Connect the accessory to the designated E3 or E4 port of the DJI E-Port V2. Verify that the payload is securely mounted using the appropriate mounting method. Do not exceed the connector's payload limit or the aircraft's overall payload limits. The waterproof rating depends on the attached payload. Do not assume the complete assembly is waterproof based on the connector alone. Before You Order Please confirm that you own a DJI Matrice 400 and that your intended payload supports the connector's interface and mounting method. The maximum payload is 3 kg for quick-release mounting or 6 kg for screw-lock fastening. These limits do not replace the aircraft's payload restrictions or the payload manufacturer's requirements.