Diode Dynamics SL2 Pro - LED Forward Bulbs

The most recommended LED kits, designed, engineered, and made in the USA. FREE STANDARD SHIPPING! All products $49 & up come with free Standard Shipping!* *USA Contiguous (Lower 48) States only. Next-Generation TST Technology. The SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus. Optimized Optical Focus. Your vehicle's housings are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 Pro LED bulb was engineered to focus light just like your original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to "over-focus", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 Pro was optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output. Fully Integrated Design. Unlike traditional LED bulbs, the SL2 Pro LED bulb doesn't have any extra wires or external drivers. Along with its compact size, that means excellent fitment inside your housing, without the need to tuck away wiring or bulky drivers. Installation is easy - simply remove your factory bulbs and the SL2 Pro will fit in its place, with a plug-and-play connector. And if your original bulb is installed at an angle, no worries - SL2 Pro has you covered with an adjustable collar that can be securely locked at the correct position.  Internal Cooling. The SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. Reliability. Every part of the SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 Pro was put through its paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. It's also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. It's even compatible up to 30V! We're so confident in the SL2 Pro, that it's backed by an industry-leading limited LIFETIME warranty.  DO I NEED DECODERS? Check here to see if your vehicle requires a decoder module APPLICATION NOTICE: LED bulbs are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in ATV, snowmobile, and off-road racing use. International legality varies by country. Note: This usage regulation is not unique to Diode Dynamics bulbs. All LED bulbs from all brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.  MANUFACTURER SPECIFICATIONS: Measured Lumens: 2400 (per bulb) Color Temp (CCT): 6000K Power (watts): 14 Operating Voltage: 9-30V Current (amps @ 12.8V): 1.1 Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: TST Automotive Grade LED Connector(s): OEM-Size Plug and Play Driver Features: Internal, Constant Current, Transient Protection Materials: Copper PCB, Die Cast A360 Aluminum Cooling: Integrated, Top-Mounted Cooling Fan Compliance Ratings: SAE J575 Durability Test Adjustability: Fully adjustable collar Included: 2X LED Bulbs with Integrated Drivers & hex tool Warranty: Lifetime Sizes available: H4, H7, H8, H9, H10, H11, H13, 9005, 9006, 9011, 9012 Looking for Help? Look no further. Troubleshooting & FAQ Support Request NOTES: - Additional anti-flicker/canbus module may be required on some vehicles to avoid flicker or bulb error messages Philips offers a great guide to validate fitment for your vehicle: https://www.philipsautolighting.com/ BRI Source cannot accept returns based on the wrong size ordered! See Terms & Conditions for more details. * Results may vary in your application.