DIN ETHERGATE Mk2

The ENTTEC DIN Ethergate Mk2 is a 2-universe bi-directional Ethernet to DMX/RDM converter in a compact 4-module DIN-rail form factor, supporting Art-Net, sACN, KiNet, and ESP with PoE or 12–24V DC power input. From the Manufacturer The DIN Ethergate Mk2 is a reliable DMX node designed for architectural, commercial, and entertainment installations. It supports 2 universes of bi-directional DMX512-A conversion with Art-RDM, and Overdrive Mode enables control of up to 4,096 channels per port at higher transmission speeds of 500K, 750K, or 1000K for compatible fixtures. Dual Ethernet ports — one with PoE — allow easy daisy-chaining across an installation, while configuration and firmware updates are managed entirely through a localhost web interface accessible from any computer on the network. Its slim 4 DIN-module electrically-insulated housing supports both TS35 DIN-rail and surface mounting, and pluggable terminal blocks and built-in DMX termination simplify wiring on site. All ENTTEC Ethernet hardware accepts sACN Sync and ArtSync to fully synchronize Art-Net data across all output ports and across the installation when receiving Art-Net from the same source. A 'Current Port Buffer' in the web interface allows live DMX values to be viewed for easy troubleshooting. Upon receiving power, the device is ready to operate within seconds. Note: Overdrive Mode (DMX500K/750K/1000K) is incompatible with standard DMX512-A fixtures and does not conform to ANSI E1.11 – 2024; use only with Overdrive-compatible fixtures. Features 2-universe bi-directional Ethernet to DMX512-A/RDM conversion Overdrive Mode: up to 8 universes per port (4,096 channels) at 500K, 750K, or 1000K for compatible fixtures Accepts Art-Net (with RDM), sACN, KiNet, and ESP input protocols Art-Net merging from up to 2 sources sACN Sync and ArtSync support for synchronized multi-port output Dual RJ45 Ethernet ports for daisy-chaining; port 1 supports IEEE 802.3af PoE Flexible power: PoE (IEEE 802.3af) or 12–24V DC input Localhost web interface for configuration, live DMX monitoring, and firmware updates Pluggable terminal block connectors and built-in DMX termination for installer-friendly wiring DHCP or static IP configuration (default: 192.168.0.10) IGMPv2 support 4-module DIN-rail electrically-insulated ABS housing TS35 DIN-rail mount or surface mount in any orientation Forward-facing status LED indicator; network link/activity indicators on RJ45 ports Ready to operate within seconds of receiving power 3-year manufacturer warranty Recommended use: Architectural and commercial lighting installations, entertainment DMX networks, permanent installs requiring Ethernet-to-DMX conversion Specifications Control Input Protocols: Art-Net (RDM), KiNet, sACN, ESP Output Protocols: DMX512-A/RDM (250 Kbps), DMX500K (500 Kbps), DMX750K (750 Kbps), DMX1000K (1000 Kbps) Max. Channels (Standard): 1,024 ch (2 universes) Max. Channels (Overdrive): 4,096 ch per port (8 universes) at 500K/750K/1000K Max. Refresh Rate: 44 FPS (1, 2, 4 universes) / 22 FPS (8 universes) Art-Net Merging: 2 sources DMX & RDM Timings: Break time 300ms, MAB 15ms Network Configuration: DHCP / Static (default 192.168.0.10) IGMP Version: IGMPv2 Firmware Updates: Via web interface Connections Ethernet: 2 x RJ45 (10/100Base-T); port 1 supports PoE DMX: 2 x bi-directional, 4-pin Phoenix pluggable terminal Power Input: 2-pin Phoenix pluggable terminal Electrical Power over Ethernet: IEEE 802.3af DC Input Voltage: 12–24V DC Max. Power Draw: 7W Max. Heat Dissipation: 7W Construction / Physical Body Material: ABS plastic IP Rating: IP20 Mounting Options: Surface mount, TS35 DIN-rail mount Unit Dimensions: 100.5 x 72.25 x 34 mm Unit Weight: 0.11 kg / 0.24 lbs Shipping Dimensions: 140 x 140 x 40 mm Shipping Weight: 0.16 kg / 0.35 lbs Environmental Operating Temperature: 0°C to 50°C / 32°F to 122°F Operating Humidity: 5–95% (non-condensing) Certifications Warranty: 3-year return to base manufacturer warranty