
$27.45
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Is my reverse osmosis system still working? Is my filter doing anything? What is actually in my tap water? A TDS meter gives you a first answer in about ten seconds. Dip it in a glass and it shows total dissolved solids (TDS): the minerals, salts and metals dissolved in your water, in parts per million (ppm). We use TDS meters constantly to check that an RO membrane is still doing its job. This is the same quick check, in your pocket. At a glance Reads TDS in ppm in seconds, with no strips or reagents Shows water temperature on both models HOLD button freezes the reading so you can lift the meter out and read it Protective cap keeps the probes clean between tests Two models: the TDS-3, or the TDS & EC that adds electrical conductivity in µS/cm Which model is right for you? TDS-3 (TDS + Temp): the simple one. Three buttons (HOLD, TEMP, ON/OFF) for TDS and water temperature. Right for checking tap, filtered and RO water at home. TDS & EC (TDS, EC + Temp): adds an EC reading in microsiemens per centimeter (µS/cm) and switches between readings with the SHIFT button. Reads TDS from 0 to 9,999 ppm and EC from 0 to 9,999 µS/cm, accurate to ±5%, with automatic temperature compensation, a titanium alloy electrode and auto shut-off after 5 minutes. A good pick for hydroponics and aquariums, where EC is the usual unit. How to check your RO system Run cold water from your kitchen tap for a few seconds and read a cupful. Read a cupful from your RO faucet. Compare. Reverse osmosis removes most dissolved solids, so the RO reading should be far lower than the tap reading. Write the numbers down and repeat every month or two. When the RO reading starts to climb, it is time to look at your membrane and pre-filters. What a TDS reading cannot tell you A TDS meter measures how easily water carries a small electrical current, then converts that to an estimate in ppm. It counts everything dissolved together, healthy minerals like calcium and magnesium included, and it does not say what any of it is. A low number is not a safety verdict: a TDS meter cannot detect lead, PFAS, bacteria, nitrate or pesticides. For those, a certified water test is the answer. Learn more in our guide, How to Use a TDS Meter (and What It Can't Tell You). Questions? We are here Not sure what your reading means for your water or your system? Our water specialists have helped customers since 1994. Reach us by phone, email or chat.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2024
$27.45