Nova Points

Diamond Pacific Nova Points offer a convenient way to quickly sand and polish gemstone and opal carvings with your Foredom or Dremel. Nova Points solve many gemstone carving challenges by offering the speed, high performance, and no mess of Diamond Pacific's legendary proprietary Nova resin-bond diamond formulas in 2 sizes of 2 Nova tips shapes for use on your carvings during the sanding and polishing processes. They are designed to avoid headaches while sanding those hard-to-reach areas to remove the coarse scratches from your latest lapidary masterpiece. Use After a gemstone, custom body jewelry carver, or other lapidary artist creates a preform for a carving with sintered carving burs or your preferred sequence of carving bits, the go-to sequence of Nova bits for sanding and polishing many commercial lapidary materials with a Foredom or Dremel is the 280, 600, 1200, and 3,000 grit diamond polishing bits, followed by the use of a 14,000 grit Nova Point. A Dremel will need a #481 collet to fit these shafts, available for a few dollars at any hardware store selling Dremel accessories. While this sequence will put an acceptable polish on most stones, many hard-to-polish material may require more steps such as additional grit Nova burrs, Diamond Pacific Phenol points or SUVA's exclusive hardwood polishing burs charged with Mt. Mist Super Polish or standard diamond paste, or felt burs with your favorite lapidary polish such as tin oxide, or cerium oxide. Specifications Diamond Pacific Nova carving points are a resin-bond diamond compound bonded to a mandrel shaft for use in lapidary rotary tools such as a Foredom or Dremel. Pictures show the reference shape, but Nova burs are slightly flexible and will wear away with use and abuse. Diamond Pacific Nova burs MUST be used with a lubricant like water or silicone extender fluid. Available Shapes and Sizes All sizes are approximate on new Diamond Pacific Nova Points and can vary slightly during construction. Diamond Pacific Nova tips for Dremel and Foredom tools have a mandrel size of 3/32 inch which fits most Foredom and Dremel power rotary tools used in gemstone carving. Nova Dremel bits and other lapidary Dremel bits ship for free when you order $100 or more! N1M Small Bullet Point is 7mm tapered to 4mm, pointed tip N1L Large Bullet Point is 9mm tapered to 5mm, pointed tip N2M Small Rounded Cylinder is 8mm wide, round tip N2L Large Rounded Cylinder is 9.5mm wide, round tip All are roughly 18-20mm tall, sizes vary slightly Available diamond Nova Points Grits and Colors Diamond Pacific Nova burs in pre-polish grits are available in a discounted SET of 4 Nova points containing of 1 each of the following Nova grit colors 280 grit - Black 600 grit - Brown 1200 grit - Grey 3000 grit - Rose All Diamond Pacific Nova polishing points are also available in individual grits 60 grit diamond-resin - Green 100 grit diamond-resin - Lt Green 140 grit diamond-resin - Rust 280 grit diamond-resin - Black 600 grit diamond-resin - Brown 1200 grit diamond-resin - Grey 3000 grit diamond-resin - Rose 8000 grit diamond-resin - Tan 14000 grit diamond-resin - Cream 50000 grit diamond-resin - Lt Blue Instructions and Downloads