Husky Arbor System

The Diamond Pacific Husky arbor units are ideal for setting up multiple grinding, sanding, and polishing stations in industrial shop set ups and for community center and club workshops. You can mount an 8-inch cabbing wheel or expanding drum on each end of the shaft. Both ends have a 1/2-inch step for mounting laps. The right hand will also accept 1/4"-20 screw-back discs. The possibilities are endless... You can set up the arbor as either a stone or metal finishing unit. You can use expanding drums with belts or a variety of grinding and polishing wheels. As a grinding station, this durable arbor is ideal for mounting heavy sintered grinding wheels. You can also equip the Husky with 8-inch or smaller diamond Galaxy Hex Wheels, or standard Galaxy wheels. Equip the Husky with Diamond Pacific Galaxy Convex Carver Wheels for a station to make custom body jewelry. Set up a sanding station with an extensive range of available grit Nova Wheels and Nova Laps Setup as a polishing station with a cerium oxide polishing wheel or Cerium Oxide Nova laps or canvas pads to use with your choice of lapidary polishing compounds. Construction The 8-inch arbor is heavy duty, cast aluminum with a split housing so just the removal of four screws allows you to change the belt or remove the shaft for bearing replacement. The arbor shaft is 3/4-inch stainless steel with overall length of 18 inches. Cushion-mounted bearings and 3-step pulley attach to your motor (not included). Overall dimensions approximately 20 x 10 x 10 inches. Original manufacturer spare and replacement parts are available for your Diamond Pacific Husky arbor.