DSP-55, MINI LOOP KIT, 100'

The Diablo Controls DSP-55-100 mini loop kit pairs the DSP-55 plug-in detector with a Diablo Free Exit Probe (mini-loop) on a 100 ft lead-in. The probe is buried in a small vertical hole instead of a saw-cut loop, so it suits gravel, dirt, pavers, cobblestone and poor pavement. It runs on 8 to 35 VDC, a range Diablo gives for low voltage solar installs, and has a 10-pin Molex connector. Three solid-state FET outputs (A, B and B inverted) are rated 250 mA at 30 V. Output B can be presence, entry pulse, exit pulse or fail. A 10-position rotary switch sets sensitivity (factory 5), with four loop frequencies, sensitivity boost, and a fail-safe or fail-secure DIP switch. In Free Exit Probe mode the detector always gives an entry pulse. Loop inductance range is 20 to 1500 µH. It operates from -35°F to 165°F. What's Included DSP-55 plug-in detector Diablo Free Exit Probe (mini-loop) with 100 ft lead-in Before You Order Free exit only. The probe gives an entry pulse and cannot be used as a safety or obstruction sensor. Lead-in length sets the maximum distance from the probe to the control box. Diablo also makes a 75 ft kit. The DSP-55 is DC only and has solid-state outputs. Use a Diablo RK-1R rack if the operator needs a relay contact.