DIABLO DML-9LP, MINI-LOOP KIT, 100'

The Diablo Controls DML-9LP-100 mini-loop kit pairs the DML-9LP low power free exit detector with a Diablo Free Exit Probe (mini-loop) on a 100 ft lead-in. The detector runs on 10 to 30 VDC or 10 to 28 VAC, draws about 1 mA when not in detect, and has one relay output (NO and NC, 1 A max) on a removable 7-pin terminal block. The probe is buried in a small vertical hole instead of a saw-cut loop, so it works in gravel, dirt, pavers and poor pavement. The detector gives a single 125 ms pulse on detect and is fail-secure. It operates from -35°F to 165°F. What's Included DML-9LP free exit detector Diablo Free Exit Probe (mini-loop) with 100 ft lead-in Before You Order Free exit only. The probe pulses on entry and cannot be used as a safety or obstruction sensor. Diablo calls for a hole about 1 in diameter and 18 to 24 in deep, or slightly larger if the probe goes in PVC pipe, plus a 1/4 in saw slot for the lead-in. Lead-in length sets the maximum distance from the probe to the gate control box.