Denon AVR-A10H 13.4-Channel Receiver

Denon AVR-A10H 13.4-Channel 8K AV Receiver 13-channel A-Series AV receiver with 150 W per channel, 8K HDMI, HEOS, Audyssey MultEQ XT32, and Dirac Live upgradeability Denon's AVR-A10H is an A-Series AV receiver built for serious home theater systems, with 13 channels of onboard amplification, 13.4-channel processing, and support for speaker layouts up to 7.4.6 or 9.4.4. Rated at 150 W per channel, it can drive up to 13 speakers and four independent subwoofers, giving a high-performance theater room room-filling power and flexible bass management. Seven HDMI inputs and three HDMI outputs support modern video systems, including 8K/60 Hz and 4K/120 Hz pass-through, 8K upscaling, HDCP 2.3, HDR10+, Dynamic HDR, HLG, Dolby Vision, ARC/eARC, VRR, QFT, and ALLM. The AVR-A10H also supports immersive formats including Dolby Atmos, DTS:X Pro, IMAX Enhanced, AURO-3D, and 360 Reality Audio. Inside, Denon uses nine audiophile-grade 2-channel DACs to maximize resolution across all 17 channels, along with premium gold-plated speaker terminals and a rigid three-layer chassis to help control vibration and interference. The AVR-A10H is designed and manufactured in Denon's Shirakawa factory in Japan and tuned by the Denon Sound Master. Setup is handled through Denon's guided Setup Assistant and Audyssey MultEQ XT32 room correction. For deeper acoustic tuning, Dirac Live Room Correction and Dirac Live Bass Control are available as paid upgrades. HEOS Built-in adds app-based streaming and multi-room playback with compatible HEOS products. 13-channel monolithic amplifier rated at 150 W per channel 13.4-channel processing for up to 7.4.6 or 9.4.4 speaker configurations Dolby Atmos, DTS:X Pro, IMAX Enhanced, AURO-3D, and 360 Reality Audio support Seven HDMI inputs and three HDMI outputs with 8K/60 Hz and 4K/120 Hz pass-through HDR10+, Dynamic HDR, HLG, Dolby Vision, HDCP 2.3, ARC/eARC, VRR, QFT, and ALLM support Nine audiophile-grade 2-channel DACs for all 17 channels Four independent subwoofer outputs and 15.4-channel pre-outs HEOS Built-in for streaming and multi-room playback Audyssey MultEQ XT32 included; Dirac Live Room Correction and Bass Control available as paid upgrades Pre-Amplifier Mode for use as an AV preamp with the internal amplifiers disconnected Specifications Audio Number of Power Amps: 13 Power Output (8 ohms, 20 Hz–20 kHz, 0.05%, 2 Channels Driven): 150 W per channel Power Output (6 ohms, 1 kHz, 0.7%, 2 Channels Driven): 190 W per channel Power Output (6 ohms, 1 kHz, 10%, 1 Channel Driven): 260 W per channel Maximum Speaker Configuration: Up to 7.4.6 or 9.4.4 Immersive Audio Support: Dolby Atmos, DTS:X Pro, IMAX Enhanced, AURO-3D, 360 Reality Audio Auto Speaker Setup by Microphone: Audyssey MultEQ XT32 Dirac Live: Upgradeable; license required Front Display: 2-line FLD GUI Languages: 9 Video HDMI In/Out: 7 / 3 HDMI Video Support: 8K/60 Hz, 4K/120 Hz, 8K upscaling, HDCP 2.3 HDR Support: HDR10+, Dynamic HDR, HDR, HLG, Dolby Vision Gaming Support: VRR, QFT, ALLM ARC/eARC: Yes Inputs and Outputs Analog In/Out: 6+1 / 0 Phono (MM) In: Yes Digital Inputs (Optical / Coaxial): 2 / 2 Multi-Room Out (Analog / Digital): 2 / 0 Multichannel Pre-Out: Yes (15.4) Subwoofer Out: 4 independent Number of Speaker Terminals: 15 Speaker A/B: Assignable Bi-Amp Drive: Assignable Multi-Room Speaker Terminal: Assignable Streaming and Playback Streaming: HEOS Built-in, AirPlay 2 USB Playback: Up to 24-bit/192 kHz Supported USB Audio Formats: MP3, WMA, WAV, MPEG-4/AAC, FLAC, ALAC General System Remote Control: RC-1261 Power Consumption: 900 W Power Consumption, No Sound (ECO On / Off): 70 W / 125 W Standby Consumption: 0.1 W CEC Standby Consumption: 0.5 W Network Standby Consumption: Less than 2 W Dimensions Without Antenna (WHD): 17.1" x 7.7" x 18.6" (434.34 x 195.58 x 472.44 mm) Maximum Dimensions, Antenna Horizontal (WHD): 17.1" x 7.7" x 19" (434.34 x 195.58 x 482.60 mm) Maximum Dimensions, Antenna Vertical (WHD): 17.1" x 10.2" x 19" (434.34 x 259.08 x 482.60 mm) Weight: 52 lb. (23.59 kg)