DC47-00018A Dryer Thermostat for Samsung

Note: If you are replacing your dryer element, thermal fuse or thermostat because your dryer is having trouble heating up, we recommend replacing the dryer element, thermal fuse and the thermostat.  Click here to take a look at dryer element and thermostat kits, which include the thermal fuse. Shipping Info Same Day Shipping  If you place your order between Monday - Friday before 3 p.m., your order will be shipped on that day. If you order on Saturday before 12 p.m., your order will be shipped on that day. If you place your order outside these times, call us at 1-802-727-4126 and we will do our best to get it out the door.   Quick Delivery, All Over The Country We ship to 61% of the country in just 2 business days - See Shipping tab for more information!  Free shipping includes Saturday and Sunday delivery. 3-day delivery from the East Coast all the way to the rocky mountains and more!   We Stay On Top of It We are using the most reliable options available. Even though all major carriers are experiencing delays, we are always happy to help. If you have a question about the status of your shipment, call us directly for the quickest response at 1-802-727-4126. We’re Always Happy to Help Our support team can be contacted via email at Suppot@snap.parts, or you can call us at 1-802-727-4126 during business hours. In the event that you need support outside of business hours, snap.parts has an instant message support chat that can help you solve any problem.  Description The dryer thermostat regulates the temperature of the dryer. If the thermostat is going bad, the dryer will either get too hot or not heat up enough.   Cross Reference Information 1122485, PS4205217, B001HP6L46 Quality you can Trust! All Snap Products are made with premium materials and are tested so they last. Compatible with the following Dryer brands: Samsung Just because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance!  All Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at support@snap.parts or give us a call at 1-877-269-0086. Model Numbers Use ctrl+F then enter your model number in search bar and hit enter DV306LEW/XAA,  DV203AEW/XAA-0000,  DV206AES/XAA-0000,  DV209AEW/XAA-0000,  DV209AEW/XAA-0001,  DV210AEW/XAA,  DV218AEB/XAA-0000,  DV218AEB/XAA-0001,  DV218AEW/XAA-0000,  DV218AEW/XAA-0001,  DV219AEB/XAA-0000,  DV219AEW/XAA-0000,  DV219AEW/XAA-0001,  DV220AEW/XAA,  DV231AEW/XAA-0001 Installation Instructions Installation Instructions for DC47-00018A Unplug appliance and/or turn off circuit breakers to prevent electrocution. Remove control panel by lifting tabs. Open door and remove the two screws, next remove the four screws located at the top. Remove door panel by slightly lifting it up from two hooks that are holding it in its place. Pull off the wire harness that is connected to the door panel and remove door panel. Remove moisture sensor and set it aside so that it does not interfere. Remove the three screws that hold the heating element in. Carefully lift the element, reach in and lift locking bracket, pull out the lower heating element. Once done, lower heating element and pull it out carefully. With a flat head screwdriver, remove wires off from the thermostat and then the screws holding the thermostat and remove thermostat. Place new thermostat in position. Place screws in. Place wires, black wire is toward the dryer and blue wire is away from the dryer. Carefully place assembly back into the dryer. Place lower bracket back in position by lifting heating element, placing the two tabs that the lower bracket has in position, making sure the front tab of the lower bracket goes into its slot as well, lower heating element so that it lays in the bracket. Place three screws holding it in its place. Reattach moisture sensor. Place door panel by attaching it to the three brackets located at the bottom. Reconnect door switch, reattach door panel in its place and place in screws, open door and replace two screws, close door. Replace front console by aligning tabs with slots in the front panel. Place top in place, align tabs and lock it in place. With a screwdriver place back in screws of the back panel. Turn on appliance. Tools Needed: Screwdriver Small flat head screwdriver  Shipping Note: If you are replacing your dryer element, thermal fuse or thermostat because your dryer is having trouble heating up, we recommend replacing the dryer element, thermal fuse and the thermostat.  Click here to take a look at dryer element and thermostat kits, which include the thermal fuse.