Data Center Electrical Utility Kit

Description Data Center Electrical Utility Kit The Jonard Tools TK-DC02 is a purpose-built electrical termination and power distribution kit for technicians responsible for installing, connecting, and maintaining power infrastructure at and around data center facilities, including traditional setups like edge and enterprise, hyperscales, colocations, and AI networks. This kit covers the hands-on electrical work that happens before and beyond the rack room, from stripping and terminating heavy-gauge conductors to crimping lugs, pulling wire through conduit, and verifying circuits safely. A full suite of insulated pliers, screwdrivers, and strippers keeps technicians protected in live or mixed-voltage environments, while the CAT III 1500V solar clamp meter handles accurate measurements across DC and AC power feeds. A rugged technician backpack keeps everything accessible across large facility buildouts and multi-site deployment projects. Built for technicians working on power distribution, service entrance, generator connections, and PDU feeds, the TK-DC02 eliminates the need to source tools across multiple kits for electrical infrastructure work, covering the full power termination workflow in one organized, field-ready package. Features Features Strip and prepare conductors across a wide gauge range with the CST-1900 handling round cable from 3/16" to 1-1/8", JIC-2030 for 20-30 AWG signal wire, WSS-1020 covering 10-20 AWG, and INP-4065 for live wire stripping from 8-30 AWG. Work safely in live and mixed-voltage environments with a full insulated tool suite including INP-1072 combo plier, INP-2065 long nose plier, INP-3062 diagonal plier, and a complete insulated screwdriver set across Phillips and slotted configurations in INS-180, INS-2100, INS-3150, INS-4100, INS-475, INS-6150, and INS-8175. Pull, route, and work wire through conduit and tight infrastructure pathways with the JIC-685 lineman's plier with integrated fish tape puller and crimper, handling wire management from the entry point through final termination. Crimp and terminate lugs and ring terminals cleanly and reliably with the TCC-1416 electric lug and terminal crimper and TCK-178 solderless ring and lug terminal kit, supporting power distribution connections at panels, PDUs, and service entrance points. Measure  AC and DC circuits accurately and safely with the ACM-1500DC Solar+ CAT III 1500V clamp meter, built for power distribution verification at generator feeds, solar arrays, and data center electrical infrastructure. Stay productive across large facility sites with the SOL-F1 rechargeable tactical flashlight for low-light work areas and the BP-100 heavy-duty technician backpack keeping the full kit organized and accessible across multi-building deployments. Optional Add-Ons ACM-1000 - 1000A Digital Clamp Meter AMM-600 - 600V Automatic Intelligent Digital Multimeter DMMT-320 - Thermal Imaging Diagnostic Multimeter Specifications Spec Sheet TECHNICAL SPECIFICATIONS DIMENSIONS 14.76 X 7.4 X 18.7 WEIGHT 15.53LBS DATA CENTER TYPE TRADITIONAL (EDGE, ENTERPRISE, COLOCATION), HYPERSCALE (CLOUD, LARGE-SCALE), AI NETWORK (CAMPUS/GPU CLUSTERS) ENVIRONMENT TYPE ALL ENVIRONMENTS (INSIDE PLANT (ISP), OUTSIDE PLANT TO INSIDE PLANT (OSP-TO-ISP) & OUTSIDE PLANT (OSP) SOLUTIONS FOCUS OPERATIONS & POWER LIFECYCLE PHASE ALL PHASES (PREP & INSTALL, TESTING & COMMISSION, REPAIR & MAINTENANCE) CAPABILITIES BEND, CRIMP, CUT, DRIVE, ELECTRICAL TESTING, GRIP, ILLUMINATE, PULL, STRIP, STORE & CARRY, TERMINATE CRIMPING CAPABILITIES INSULATED BUTT CONNECTORS, TELEPHONE SPADE LUGS, OPEN BARREL CONNECTORS, AND NON-INSULATED LUGS/TERMINALS CUTTING CAPABILITIES SIDE-CUT: LIVE WIRE (UP TO 1000V) & HIGH STRENGTH WIRE, BOLTS, NAILS FLUSH CUT: LIVE WIRE (UP TO 1000V) & HIGH STRENGTH WIRE, BOLTS, NAILS DIAGONAL CUT: LIVE WIRE (UP TO 1000V) DRIVER SPECS LIVE CIRCUITS (UP TO 1000V): PHILLIPS: #1 X 3"", #2 X 4"", #3 X 6"" CABINET SLOTTED: 5/32"" X 4"", 1/4"" X 6"", 5/16"" X 7" ELECTRICAL TESTING CAPABILITIES DC/AC CURRENT, DC/AC VOLTAGE, RESISTANCE, CAPACITANCE, TEMPERATURE, CONTINUITY/DIODE, UP TO 2500V & 999.9A ILLUMINATING CAPABILITIES 250-1500 LM, 4-8 HRS PULLING & GRIPPING CAPABILITIES STEEL FISHTAPE: 1/8-1/4"" (3.18-6.35 MM) LIVE WIRE (UP TO 1000V) & GENERAL MATERIALS STRIPPING CAPABILITIES ROUND CABLE: 3/16-1-1/8"" (4.76-28.58 MM) DIAMETER WIRE: 10-30 AWG (2.6-0.5 MM) SOLID OR STRANDED LIVE WIRE (UP TO 1000V): 8-30 AWG (3.26-0.25 MM) SOLID OR STRANDED TERMINATING CAPABILITIES RING, FORK, SPADE & BUTT-SPLICE, 10-22 AWG (2.6- 0.64 MM) REMOVAL CAPABILITIES SLIT : PVC, RUBBER, PE SPIRAL: PVC, RUBBER, PE RING: PVC, RUBBER, PE STRIP: PVC, RUBBER, PE UPC # 810215350551 What’s In The Box What’s In The Box Qty 1 - Data Center Electrical Utility Kit KIT INCLUDES ACM-1500DC SOLAR+ CLAMP METER CAT III 1500 V BP-100 TECHNICIAN’S TOOL BAG BACKPACK CST-1900 ROUND CABLE STRIP & RING TOOL JIC-2030 WIRE STRIPPER, 20-30 AWG JIC-685 LINEMAN’S PLIERS WITH FISH TAPE PULLER & CRIMPER WSS-1020 STAINLESS STEEL CURVED WIRE STRIPPER, 10-20 AWG INP-1072 INSULATED LINEMAN’S COMBO PLIERS, 7 1/2” INP-2065 INSULATED LONG NOSE PLIERS, 6 1/2” INP-3062 INSULATED DIAGONAL PLIERS, 6 1/4” INP-4065 INSULATED WIRE STRIPPER, 6 1/2” INS-180 PHILLIPS INSULATED SCREWDRIVER, #1 X 3” INS-2100 PHILLIPS INSULATED SCREWDRIVER, #2 X 4” INS-3150 PHILLIPS INSULATED SCREWDRIVER, #3 X 6” INS-4100 CABINET SLOTTED INSULATED SCREWDRIVER, 5/32” X 4” INS-475 CABINET SLOTTED INSULATED SCREWDRIVER, 1/8” X 3” INS-6150 CABINET SLOTTED INSULATED SCREWDRIVER, 1/4” X 6” INS-8175 CABINET SLOTTED INSULATED SCREWDRIVER, 5/16” X 7” TCC-1416 ELECTRIC LUG AND TERMINAL CRIMPER TCK-178 SOLDERLESS RING AND LUG TERMINAL KIT, 178 PCS SOL-F1 SOLIS™ RECHARGEABLE TACTICAL FLASHLIGHT