DAS AUDIO INTEGRAL-A404 100W 4 Ch. Amplifier

DESCRIPTION INTEGRAL-A404 is a quad channel, 1U, high efficiency class D amplifier intended for permanent installation use. It is equipped with switching universal mains power supply and auto-standby functionality when no signal presence is detected providing energy savings. The amplifier delivers 4x100W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x200W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter. The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations. SPECIFICATIONS Output Power Ratings Power 8 Ohms, Both Channels Driven 4 x 50 W Power 8 Ohms Bridged 2 x 200 W Power 4 Ohms, Both Channels Driven 4 x 100 W Power 100 V 2 x 200 W Power 70 V 2 x 200 W Electronics and Connectors Amplifier Channels 4 Output Circuitry Class D Frequency Response 20 Hz-30 kHz (+0 – 0.5 dB) Sensitivity 1.38 V (5 dBu) Voltage gain 30.4 dB Damping Factor > 1000 (8 Ω load, 1 kHz and below) Controls Power On/Off, Gain Pots Cooling Side-Right-to-Left Amplifier Protections Short Circuit, DC Output, Temperature, Over/Under Voltage LED Indicators On-Protect-Standby, Signal-Clip Audio Signal Input Connector Terminal Block Speaker Output Connector Terminal Block Current Draw 230 V / 115 V 1.5 A / 3.0 A Dimensions-Weight Dimensions ( H x W x D ) 44 x 483 x 208 mm 1,7 x 19,0 x 8,2 in Net Weight 2,9 kg ( 6,4 lb ) Shipping Carton Dimensions ( H x W x D ) 130 x 525 x 315 mm 5,1 x 20,7 x 12,4 in Shipping Weight 3,5 kg ( 7,6 lb )