Sensor Channel Modification for DDR X2 Raw Thrills

Sensor Channel Modification for Dance Dance Revolution DDR X2 Raw Thrills. This will allow you to use our PIU, ITG, DDRA & DDRX Arcade Pad Sensor with Dance Dance Revolution X2 pads manufactured by Raw Thrills. It replaces the existing channels in the DDRX2 pads.  Our PIU, ITG, DDRA & DDRX Arcade Pad Sensor have the same connection as the DDRX2 pad so wire splicing is not necessary. All you need is a screwdriver to remove the old sensors channels and replace them with these. Sensors are not included.  Installation Remove the old sensors Unscrew and remove the old sensor channels Replace with new sensor channels, carefully screw the new sensor channels in place (hand tighten only) Put new PIU, ITG, DDRA & DDRX Arcade Pad Sensor in sensor channel and plug in sensor Put the top piece over the new sensor and replace the panel. Due to the low profile design of the original DDRX2 sensors there is not a lot of space for the sensors. Therefore the sensor channel mod is thin. Once installed it will be stable but take care when handling and installing the sensor channel mod. Be sure to hand tighten the screws to avoid any damage. The base is made of durable PETG material and the top is made of flexible TPU.  ~If for any reason you are not happy with the part you can get a full refund within 30 days~