CyberBrick Time Lapse Hardware

Important Update: Bambu Lab Products Due to high demand, Bambu Lab products may have slightly longer lead times. We are diligently working with the vendor to ensure timely delivery. For the latest information on current stock, please contact one of our STEM Experts at 800.985.7836. CyberBrick Time-lapse Kit Additional Resources: User's Manual   Highlights: This device is specially designed for the Bambu Lab series 3D printers to enable time-lapse photography. It supports multiple shutter triggering methods, including Bluetooth shutter, wired shutter, and mechanical servo shutter, making it compatible with a wide range of external cameras. When the printer sends a shutter command, the device automatically triggers your camera to take photos, allowing you to easily capture every stage of the printing process. By combining these photos into a video, you can effortlessly create high-quality 3D printing time-lapse footage.   This kit includes a Multi-Function Core Board and a Time-lapse Trigger Expansion Board. Just install the core board onto the expansion board, connect it to your printer with the Bambu Bus cable, and follow the wiki to quickly pair your camera. The core board comes preloaded with the required firmware, so you can start timelapse photography right away.   Technology Specifications/Requirements: 4-Pin interface 6-Pin interface 2.5mm Shutter cable interface to control the camera shutter Multi-function buttons & Indicator lights for connection, debugging, and light language Steering gear connection to simulate button operation and control shutter release Multi-Function Core Board access Orientation marks to ensure proper installation alignment   Bluetooth Compatibility List: Android: Android 12 or later iOS: iOS 16 or later HarmonyOS: HarmonyOS 4.2.0 or later Sony: a7C2/a7M4/a7R5/FX30/a6700 Canon: EOS R7/EOS R6/EOS R50 Nikon: Z30/Z611     Special Notes and Considerations: For security and stability, the CyberBrick Multi-Function Core Board only supports firmware updates through official tools. Flashing with third-party tools is not supported and may cause irreversible damage, which is not covered by warranty. Please use only official tools for any firmware operations. Thank you for your understanding! If you have purchased the time-lapse photography shield and are using it together with the Cyberbrick core board, please refer to the wiki to flash the time-lapse photography firmware. The company is not responsible for any device damage, malfunction, fire, or other losses resulting from failure to comply with the above requirements. Please strictly follow the safety instructions for this product.