Custom No-Drill Command Strip Bracket for Doorbell Mounts

No-Drill Command Strip Adapter for Swivel Mounts (Damage-Free Base) No-Drill Mounting Solution for Your SWIVEL MOUNT! This listing is for an **ADD-ON NO-DRILL ADAPTER SYSTEM**. It provides a way to mount one of our Adjustable Swivel Mounts (sold separately) to a smooth surface using included 3M Command™ Strips, eliminating the need for drilling. What You Get: This kit includes one (1) 3M Command™ Jumbo Universal Picture Hanger (metal base + strips) with a custom **pre-attached plastic adapter plate**. This adapter plate is designed to accept the base of our standard Adjustable Swivel Mounts. ADJUSTABLE SWIVEL MOUNT & DOORBELL NOT INCLUDED: You must purchase your desired Adjustable Swivel Mount (0-35° or 15-90°, selecting your doorbell model on *that* listing) separately. This product is only the no-drill base system for it. When ordering *this* Command Strip Adapter, please still **select your doorbell model from the list** on this page. While the custom plastic adapter piece that connects to the Command strip is universal for our swivel bases, selecting your doorbell model here helps us ensure overall system compatibility and provide the best support if you have questions. The specific adapter for your doorbell model itself comes with the Swivel Mount that you purchase separately. Want Swivel Adjustment Without Drilling? Problem Solved! Love the idea of our Adjustable Swivel Mounts but can't drill into your walls or door frame? This Command Strip Adapter System is the perfect companion! It creates a secure, damage-free foundation on suitable smooth surfaces, allowing you to then attach your chosen Swivel Mount. Ideal for renters, apartments, dorms, or any situation where a temporary, non-damaging installation is essential. This system is designed for **WIRELESS/BATTERY-POWERED DOORBELLS** as wires cannot pass through the door/wall with this setup. CRITICAL: Surface & System Compatibility Swivel Mount Compatibility: This adapter base is designed to accept the standard base of DoorbellMount.com Adjustable Swivel Mounts (which typically have 2-5/8" hole spacing). Surface Requirements for Command™ Strips: For successful, strong adhesion, you MUST use this on a **CLEAN, FLAT, SMOOTH, and properly prepared surface.** Ideal Surfaces: Smooth Painted Wood, Tile, Metal, Glass, Smooth Finished Composites. WILL NOT WORK RELIABLY ON: Stucco, Rough or Uneven Brick, Vinyl Siding with deep texture/overlaps, Wallpaper, Heavily Textured Paint, Unpainted/Porous Wood, or other non-smooth/porous surfaces. Please carefully follow all 3M Command™ instructions for surface preparation, application, and weight limits. Adapter System Specifications Included Command™ Hanger Base: Approx. 3" Height x 2.1" Width x 0.316" Thickness (Metal 3M Command™ Jumbo Universal Picture Hanger). Integrated Plastic Adapter Plate: Pre-attached to the Command™ Hanger. Provides 2-5/8" hole spacing to accept our standard Adjustable Swivel Mount base. Overall Depth Added by this System (before Swivel Mount): Approx. 3/8 inch (thickness of Command Hanger + Adapter). Key Features & Benefits: Enables No-Drill Swivel Mount Installation: Use your favorite Swivel Mount without screws into the wall/door. Utilizes Genuine 3M Command™ System: Includes metal Jumbo Universal Hanger and adhesive strips (8lb rated - verify total weight). Pre-Assembled Adapter: Custom plastic adapter plate comes pre-attached to the Command™ hanger base, ready for your Swivel Mount base. Ideal for Renters & Temporary Setups: Damage-free solution for smooth, suitable surfaces. Requires Separate Swivel Mount: Pair this with the Adjustable Swivel Mount (0-35° or 15-90°) and doorbell-specific top bracket that you purchase separately. Durable Materials: PETG plastic adapter plate, Metal Command™ hanger. Installation Guide (Command Adapter + Your Swivel Mount) Prepare Surface: Crucial Step! Thoroughly clean your chosen flat, smooth mounting surface with isopropyl rubbing alcohol. Wipe gently and let it dry completely (usually about 1 hour - follow 3M instructions). Do not use household cleaners. Apply Command™ Bracket Assembly: The included 3M Command™ Strips are pre-attached to the metal bracket (which has our plastic adapter also pre-attached). Separate the strips. Remove one side of the liners and apply strips to the back of the metal bracket. Remove remaining liners. Press Firmly to Surface: Press the entire Command™ Bracket Assembly (metal part with plastic adapter) firmly against the prepared surface for at least 30 seconds. For strongest adhesion, wait at least 1 hour before attaching your Swivel Mount base to this adapter, as per 3M Command™ instructions. Attach Your Swivel Mount Base: Take the separate **Adjustable Swivel Mount base piece** (from your Swivel Mount kit). Align its 2-5/8" spaced holes with the pilot holes on the plastic adapter plate (that's part of this Command assembly). Secure the Swivel Mount Base using the **#6 screws provided with your Swivel Mount kit** (use PH2 driver). Tighten screws snugly to secure the Swivel Base to the plastic adapter. Do not overtighten. Continue Swivel Mount Assembly: Proceed to attach the Swivel Bracket, your specific Doorbell Adapter Bracket, and your doorbell to the now-mounted Swivel Base, following the installation instructions provided with your main Adjustable Swivel Mount. Remember to set and lock your desired angle. Always refer to and strictly follow the instructions on the 3M Command™ product packaging for surface preparation, application, temperature guidelines, weight limits, and removal. DoorbellMount.com is not responsible for improper Command™ strip installation or use on unsuitable surfaces. Intended for wireless/battery doorbells. Product Visualization & Info View 3M Command™ Jumbo Universal Hanger Info & Instructions (Ensure total weight of your Swivel Mount + Doorbell is within Command™ strip weight limits) Questions About Surface Compatibility or Use? Unsure if this Command Strip adapter system is right for your surface or how it integrates with our Swivel Mounts? Contact us! Email: shop@doorbellmount.com (Send pictures!) Text/Call: 1-833-326-6868 (Text pictures!) Color: Metal Command™ Hanger is typically white/metal. The integrated plastic adapter plate is Black. Custom colors for the plastic adapter may be available via the Color Change Request item. Adapter System Only: This listing is for the 3M Command™ Hanger with pre-attached plastic adapter plate and Command™ Strips ONLY. The Adjustable Swivel Mount (including its base, swivel mechanism, and doorbell-specific top bracket) and the Video Doorbell must be purchased separately. Adhesion Responsibility: Successful and safe mounting depends entirely on correct application according to 3M Command™ instructions and use on a suitable, clean, flat, smooth surface within specified temperature ranges and weight limits. User assumes all responsibility for ensuring secure adhesion. 3D Printed Adapter: The plastic adapter plate is 3D printed (PETG). Minor cosmetic variations may exist. Mount your Adjustable Swivel Doorbell Mount anywhere with this No-Drill Command Strip Adapter System! Remember to purchase your Swivel Mount separately and select your doorbell model on that listing.