CS Current Sensor Series Switch Sets

These products are all Made to Order Which means they are non-cancelable and non-refundable Description CS Current Sensor Series Switch Sets The new sensors can be purchased with the protection built directly into your reed switch or you may prefer the CS-1 heat shrink version, which you connect in-line with your switches. Two things cause switch failure: 1) Excessive Current: Switch protected from excessive current by Quick Blow fuse. Maximum reed switch rating is .5 amp. = 500 mA switching. If current exceeds .5 amp. fuse will blow. In Fail Safe condition, switch must be replaced. 2) High Voltage: SIDActor threshold 60 AC/DC volts. If voltage exceeds 60 volts, SIDActor will clamp down, channeling any voltage above 60 directly to ground but will not cause switch device to fail or mis-operate and will continue to work. Features Features Fails Safe With Excessive Current Micro-Weld Switch Protection Channels Voltage Above 60 V To Ground Available In Recessed & Surface Styles Plus Heat Shrink For In-Line Installations Made in the U.S.A. Specifications Specifications Spec Sheet What's In The Box What's In The Box 1 x Heat Shrink