CubePilot Herelink Blue Bundle V1.1

The Herelink Blue V1.1 Bundle is an integrated remote controller, ground station, and wireless digital transmission system assembled and supported in the USA by NW Blue LLC. Compatible with Cube Autopilot, Ardupilot, and PX4, it delivers RC control, HD video, and telemetry up to 20 km, featuring an 8‑core SOC, enhanced 1000 nit display, and expanded connectivity with Ethernet and SD card support on Air Unit v1.1. Check out all our VTXs as well as the rest of our CubePilot selection! Features Integrated remote controller, ground station, and HD video transmission system Compatible with Cube Autopilot, Ardupilot, and PX4 Long-range transmission up to 20 km Air Unit and Controller with 8-core SOC for custom applications Enhanced display (1000 nit) with Ethernet and SD card support on Air Unit v1.1 Specifications Processor: SoC – Pinecine S1 CPU: 4 × Cortex A53, 2.2 GHz / 4 × Cortex A53, 1.4 GHz GPU: 4-core Mali‑T860 SDR: A7 + DSP Memory: Air Unit LPDDR3 1 GB | Controller LPDDR3 2 GB Storage: Air Unit eMMC 4 GB | Controller eMMC 8 GB Transmission Distance: FCC 20 km | CE / SRRC / MIC 12 km Video Delay: 110 ms Image Resolution: 720p @30 fps | 1080p @30/60 fps Frequency Band: 2.4 GHz ISM Receive Sensitivity: -99 dBm @ 20 MHz BW Recovery Time: < 1 s HERELINK BLUE CONTROLLER Case Material: 6061 Aluminum with Cerakote coating Weight: Herelink Blue 1.0 – 961 g | Herelink Blue 1.1 – 725 g (including 2 antennas) Size: 240 × 110 × 40 mm (not including external antennas and joysticks) Screen: 5.46 inch, 1080P, 16 million colors, capacitive touch Screen Brightness: Herelink Blue 1.0 – 600 nit | Herelink Blue 1.1 – 1000 nit Audio: Built-in speaker × 1, built-in microphone × 2 Remote: Hall effect gimbals with removable sticks × 2, scroll wheel × 1, bottom buttons × 6 with backlight, top button × 1 (right) Wireless Communication: Bluetooth / WiFi / 2.4 GHz map transmission ground / 5.8 GHz WiFi Indicator Light: Tricolor LED × 2 (upper right and left corners) Interface: MicroUSB × 1, Micro SD × 1 (supports up to 64 GB) External Antenna: Omnidirectional antenna (3 dBi) × 2, detachable Built-in Antenna: Built-in WiFi antenna Power: Built-in 4950 mAh LiPo battery Charging: Supports micro USB 5 V, 2 A current charging Power Consumption: Average ≤ 4 W (picture transmission only, medium screen brightness, WiFi off, GPS off) HERLEINK BLUE AIR UNIT V1.1 Case Material: 6061 aluminum with Cerakote coating Weight: 68 g Dimensions: 78 × 30 × 17 mm Signal Bandwidth: 20 MHz / 10 MHz Power Consumption: Average ≤ 4 W Power Input: Recommended ~7 V (min 6 V, max 12 V); avoid sharing BEC with servos Power Output: 200 mW (stock) Micro HDMI 1: Camera video signal input (recommended) Micro HDMI 2: Camera video signal input UART Interface: 3.3 V UART S.Bus Interface: Dual RC out (S.Bus1 and S.Bus2) Micro USB: Debugging and firmware upgrades; supports OTG (no external power needed) Button: Pairing and state reset Indicator Lights (1 & 2): Pairing and video transmission status MMCX Antenna Jacks (1 & 2): Signal transmission and ground communication SD Slot (Air Unit 1.1 only): For future usage ETH Interface (Air Unit 1.1 only): Network protocol device access Links NW Blue Herelink Blue V1.1 Manual NDAA / 889 Certification Includes 1x HereLink Air Unit 1x HereLink Controller 2x Omnidirectional antenna 1x GPS antenna 2x Airunit antenna 2x Joy-stick 1x HDMI cable 1x Power cable 1x Telemetry cable 1x S.Bus cable 1x Ethernet cable 1x USB cable 1x Fan (available in Herelink Blue v1.1) 1x Air Unit mounting plate 8x Silicon o-ring 4x M1.6 × 16 mm screw 4x M1.6 × 3 mm screw 4x M1.6 washer 2x M3 × 10 mm screw 2x M3 nut 1x Neck lanyard 2x Neck lanyard clips 1x Wall charger 1x Waterproof storage case