CUAV P8 Radio Drone Telemetry

CUAV P8 Radio Drone Telemetry  The CUAV P8 Radio Drone Telemetry system is designed to enhance your drone’s communication capabilities, providing reliable real-time data transmission for optimal flight performance. This telemetry module features a robust design that ensures stable connectivity over long distances, making it ideal for various drone applications, including racing and surveying. With easy integration into your existing drone setup, the CUAV P8 offers essential telemetry features, such as GPS data, altitude readings, and battery voltage monitoring, allowing you to make informed decisions during your flights. Key Features: Long-range communication capabilities for stable data transmission Real-time telemetry data including GPS, altitude, and battery voltage Easy integration with various drone systems Compact and durable design suitable for outdoor use Why Choose CUAV P8 Radio Telemetry? Upgrade your drone's capabilities with the CUAV P8 Radio Drone Telemetry system, ensuring reliable communication and essential flight data for a superior flying experience. P8 Radio UAV Telemetry P8 Radio is an ultra-long data transmission module of UAV. It adopts the communication frequency band of 840MHz. It has a transmission distance of 60km and a transmission rate of 345Kbps. It supports opoint-to-multiple, and relay communication, meet communication requirements in multiple application scenarios. 840-845MHz Frequency Band 840-845MHz is adopted to avoid interference from other devices in 433MHz, 915MHz and 2.4g communication frequency bands. 345kbps Link Rate 60km Range Using Adaptive bandwidth, automatic interference-avoidance frequency hopping, bidirectional telemetry technologies, the transmission distance reaches 60km and the transmission rate reaches 345Kbps. Supports Multiple Network Topology Communications P8 Radio supports point-to-point, point-to-multiple, and relay communication modes to meet various application scenarios and ultra-long distance communication requirements. 3S-12S Battary Input The wide voltage input of the 3S-12S battery supported by P8 covers the working voltage of most of the current UAVs. No additional BEC is required for voltage conversion. Dual-End Switchover P8 has built-in TTL and USB ports, and the air terminal and ground terminal can be switched at will. If there is damage, it can be paired with other modules to reduce the use cost. Aviation Aluminum Shell The aviation aluminum alloy shell has good thermal conductivity, light weight, high strength and corrosion resistance, and has good electromagnetic shielding efficiency. The design of heat dissipation grooves on the shell surface increases the heat dissipation efficiency. Product Specification Frequency Band 840-845MHz Spreading Method Frequency Hopping/Fixed Frequency, GMSK, 2GFSK, 4GFSK, QPSK Forward Error Correction Hamming, BCH, Golay, Reed-Solomon, Viterbi Error Detection 32 bits of CRC, ARQ Range 60km+ (high-gain fiberglass antenna + unobstructed seaside) Reference distance: 40km (The transmission distance is different under different environments/configurations, please refer to actual use) Sensitivity -109dBM@115.2kbps -108dBm@172.8kbps -106dBm@230.4kbps Transit power 100mw~1000mw(20~30dBm）； default：1000mW Antenna gain 3DBi Serial type 3.3V CMOS TTL Lina Rate 345kbps Max Baud Rate 300bps to 230kbps(57600) Operating Modes Point-to-Point, Point-to-Multipoint, Repeat Mode Input voltage 12V-60V Input current >2.5A Power consumption sleep< 1mA ; Idle< 20mA RX :45~98mA TX(peak):2A Interface Antenna: SMA inner needle Serial：GHR-06V-S USB: TYPE-C Power: XT30PW-M Operation Temperature -40°C~85°C Weight P8 module;:55g Antenna:31g Total: 86g Size 65mm×40mm×16.5mm CUAV P8 telemetry features: 1–840-845MHz frequency band 2–345kbps Link Rate 3–60km Range. 4–Support 3S-12S Battary Input. 5–Dual-end Switchover design reduced costs 6–Point-to-Point, Point-to-Multipoint, Repeat Mode P8 radio telemetry  P8 sky unit, P8 ground unit