CUAV CAN PDB Multifunctional Autopilot Baseboard

CUAV CAN PDB Multifunctional Autopilot Baseboard The CUAV CAN PDB Multifunctional Autopilot Baseboard is an innovative and versatile solution for drone builders and developers looking to enhance their autopilot systems. This advanced Power Distribution Board (PDB) not only distributes power efficiently to various components but also integrates seamlessly with the CAN bus architecture, ensuring reliable communication between the autopilot and connected devices. Designed for maximum flexibility, the CUAV CAN PDB supports a range of configurations and can be used with multiple flight controllers, making it ideal for both hobbyists and professionals in the UAV industry. It features high-current capacity, enabling it to handle the power demands of various drone setups while maintaining stable operation. The baseboard is equipped with multiple input and output ports, allowing for easy connection of sensors, ESCs, and other peripherals. Moreover, the CUAV CAN PDB comes with built-in protection features, including over-current and voltage protection, ensuring the safety of your drone components. Its compact design and lightweight construction make it easy to integrate into any drone frame without adding unnecessary weight. Whether you’re developing a custom drone project or enhancing an existing one, the CUAV CAN PDB Multifunctional Autopilot Baseboard is an essential component for achieving optimal performance and reliability in your aerial applications. CAN PDB is a multi-functional baseboard of CORE flight controller, which provides abundant interfaces, integrates the functions of power module and power distribution board, and supports voltage input of 14~60V, and provide continuous working current up to 110A. It adopts self-developed ITT algorithm and has high accuracy power detection of 0.1A and 0.05V,. It has 10 power output welding points, and provides a 5V/6A and a 12V/4A stabilized output to provide power for external device. Supports the CORE modules of V5 +,X7 +, and X7+ Pro flight controller. Aupport V5+ X7 X7+ X7 Pro CORE Units V2.5 Update Adding PPM interface enriches the support of remote control receiver protocol; The power output is upgraded from screw fixing to welding process, which reduces the risk of loose screws caused by heating and vibration caused by poor contact. Power Accuracy Sustained Current UBEC Stable Output 14 PWM Out State display Specification 硬件参数 Proccessor STM32F412 100Mhz 512K Flash 256K RAM Input voltage 10-60（3-15S Lipo） Current measurement range 0-110A Maximum current range 0-180A 5V output max 6A,stagle 6A 12V output max 4A，stable 3.5A Servo 14 Receiver Protocol SBUS/PWM/DSM CORE support V5+ X7 X7+ X7 Pro CORE Support Model Copter/Plane/Helicopter/VTOL/unmanned vehicle/Rover, etc. Firmware ArduPilot 4.0.0 or above Px4 1.11.0 or above Screw hole CORE for M2.5, other for M3 Work Temperature 20~+100°C Main IO USB 1 (type-c) UART 5(Include gps/uart4/telem1/telem2/debug) CAN bus 2 I2C bus 3 SBUS/DSM IN 1(dupont connector) PPM_IN 1 PWM OUT 14(Dupont connector) ADC3.3 1 ADC6.6 1 SBUS OUT 1(useless when install X7/X7 pro/X7+ core) RSSI 3.3V anolog voltage DSU7 1 Size&Weight Size&Wegiht 12cm(L)×10cm(W)×1.2cm(H) Weight 163g(include cable) Cable Length 30cm(not include connector) CUAV CAN PDB Features: 1–Support 14~60V voltage input, 110A current. 2–0.1A, 0.05V power measurement accuracy 3–14 PWM outputs 4–5V/6A and a 12V/4A stabilized output 5–Thickened tinned PCB to reduce internal resistance 6–Power indicator LED, visually display battery voltage status Set CAN PDB Only, CAN PDB With V5+ Core, CAN PDB With X7+ Core