Crystal Quest Countertop Disposable Fluoride Water Filter System

Crystal Quest Countertop Disposable Fluoride Water Filter System Crystal Quest® Fluoride Removal Disposable Countertop Water Filter System is dependable and built to last for years. This countertop system installs in seconds and sits on the countertop for water on demand. Quick and easy to use, stylish, convenient, and effectively removes FLUORIDE from water. Dimensions: 3.5"L x 10.5" H x 3.5" W Water travels through a Fluoride Removal cartridge: Contains Synthetic Aluminum Oxide absorbent media specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media; therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 4950 ppm Fluoride (Avg. 1100 to 1650 Gallons) . As high as 13200 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed.* Also effectively removes lead and arsenic! Sits on the counter and easily connects to any kitchen faucet. A diverter valve switches between filtered and unfiltered water. Designed in an attractive white, beige, or black housing. The SMART model travels through 7 stages of filtration In stages 1 and 7, water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter. In stage 2, water flows through a FLUORIDE REMOVAL cartridge containing Fluoride Charcoal Granulated Activated Carbon (GAC), unless Aluminum Oxide is requested.  This media is specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media; therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 4500 ppm Fluoride (Avg. 1000 to 1500 Gallons).* As high as 11000 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed.* In stage 4, 5 & 6 water flows through our SMART blend of ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness and then through special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized. In stage 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water. All Crystal Quest® GAC is a mixed blend of coconut shell and catalytic GAC to address both chlorine, chloramines and these byproducts.  A diverter valve switches between filtered and unfiltered water. Min Operating Pressure: 20 psi (pounds per sq. in.) Max Operating Pressure: 60 psi (pounds per sq. in.) Min Operating Temperature: 40 degrees F Max Operating Temperature: 90 degrees F Max Flow Rate: 0.3-0.5 gallons per minute Option for countertop models only: Washable Pre-filtration Filter Use for any countertop/faucet and helps remove the sediment thus enabling your filter to work more efficiently. * This Fluoride System and Media will accommodate for fluoride removal on municipal water that consists of inorganic fluoride.  If fluoride is organic or from natural water sources such as a well please speak with a Crystal Quest® Associate for system recommendation.