Corner Mount Angled 45° for Ring Video Doorbell 2 (2017) | 1080p | 45° Wall-Corner Mount

Corner Mount Angled 45° for the Ring Video Doorbell 2 — Slim Corner Fit for Inside & Outside Wall Corners ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee Designed and 3D-printed in the USA, this 45° Corner Mount angles the Ring Video Doorbell 2 out from a wall corner toward the walkway, with a narrow 3/4-inch base for tight corners and uneven trim. Made in the USA and 3D-printed to order from UV-stable PETG (not brittle PLA), freeze-tolerant across normal North American climates. Ships in 2-3 business days, free shipping on orders over $100, backed by our Replacement Guarantee. Compatibility — Ring Video Doorbell 2 This 45° corner mount is custom-shaped for the Ring Video Doorbell 2 (removable battery), model year 2017. The front bracket cradles the doorbell body and the slim corner base anchors into your corner trim. Not sure of your exact model? Send a photo of the back of your doorbell to shop@doorbellmount.com and we’ll confirm fit before you order. Don’t have the Ring VDB 2 yet? Buy the Ring VDB 2 on Amazon → Corner Mount Angled 45° — Standard Dimensions Base Width: 3/4 inch (narrow) — slim corner base that fits tight inside/outside wall corners and narrow trim Total Length: 2.5 inches standard Hole Spacing: 2 inches center-to-center standard — fully customizable (see note below) Corner Angle: 45° fixed — aims the doorbell out from a wall corner toward the walkway Offset from Corner: ~1 inch projection What’s Included: the small narrow corner base (embossed sizing is marked on the wall side) + 2× #6 wall screws + the model-specific doorbell screw kit Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant Price: $32.50 Need a different hole spacing? The mounting-hole spacing on this corner base is made to order — from 1-3/8" up to 4-1/8", including slotted holes, to match existing wall holes. Add it here: Customize Hole Spacing for Mounts — Fixed/Corner, e.g. 2" to 2-1/4" Slotted → Key Features & Benefits Customizable Hole Spacing & Base Length: Match existing holes (1-3/8"-4-1/8", slotted) or adjust base length. UV-Stable PETG: 3D-printed in the USA, freeze-tolerant. Replacement Guarantee: If it doesn’t fit, we send the right one at no extra cost. 45° Corner Aim: Mounts on an inside or outside wall corner and angles the camera toward the door/walkway. Slim 3/4" Narrow Base: 2.5 inches long — fits tight corners and narrow trim. Custom-Fit for the Ring VDB 2: Front cradle shaped to the doorbell body — no rattles, no gaps. Great For These Spots This 45° corner mount for the Ring VDB 2 is a great fit for: the outside corner of a porch column or wall, aiming the camera down the walkway an inside entryway corner where a flat mount would point at the wall instead of the door brick or stone corners where you need to see approaching visitors, not the masonry Customization & Add-Ons Custom Hole Spacing: 1-3/8" to 4-1/8", including slotted — Customize Hole Spacing for Mounts → Change Base Length: Lengthen or shorten the corner base to fit your trim — Change Base Length for Fixed or Corner Mount → Add Extension Distance: Push the doorbell farther off the corner — 1/2" up to 7" — Add Extension Length to Fixed/Corner Mounts → Need a different corner angle? We also make 15° and 30° offset corner mounts, plus an Adjustable Corner Mount (0-90°) to fine-tune the aim. Color Change: Default ships in Black. For trim/brick-matching colors — Color Change Request → Helpful Guides & Resources Your Ultimate Guide to Doorbell Mounting Options DoorbellMount.com FAQ & install help Manufacturer info: Ring official site Installing Your 45° Corner Mount Confirm fit & hardware. If you ordered custom hole spacing, the base holes are pre-set. Verify the doorbell back-mount holes line up with the bracket pocket. Remove your existing Ring VDB 2 from the wall (pop the doorbell off its plate/bracket). Position the 45° corner base on the inside or outside wall corner; check the aim toward the walkway with a level. Anchor the base to the corner trim with the provided #6 wall screws using a #2 Phillips screwdriver (drill optional pilot holes). Attach the doorbell adapter bracket to the mount face with the small center screws (preinstalled in most cases). Use a #1 Phillips PRECISION screwdriver. Mount the doorbell using the screws PROVIDED WITH THIS MOUNT (NOT the original screws). Confirm the field of view in the app. Caulk the top/sides if exposed to rain; leave the bottom open for drainage. Tools: #2 Phillips screwdriver, #1 Phillips PRECISION screwdriver, drill (optional pilot holes), level. FAQ — 45° Corner Mount for the Ring VDB 2 Will this 45-degree corner mount fit the Ring Video Doorbell 2?Yes. This corner mount is shaped specifically for the Ring Video Doorbell 2. It mounts on an inside or outside wall corner and aims the camera toward the walkway. Not sure of your model? Send a photo to shop@doorbellmount.com before ordering. What are the base dimensions?The narrow corner base is 3/4 inch wide and 2.5 inches long, with 2 inch center-to-center hole spacing (customizable). It mounts at a fixed 45 degree corner angle with about a 1 inch offset from the corner. Can I change the hole spacing or base length?Yes. Both are made to order. Hole spacing is customizable from 1-3/8 inch to 4-1/8 inch, including slotted holes, and the base length can be changed with the add-on. What if I need a different angle?We also make 15 and 30 degree offset corner mounts, plus an adjustable corner mount (0-90 degrees) to fine-tune the aim. Is it weatherproof?Yes - UV-stable PETG (not brittle PLA), freeze-tolerant across normal North American climates. Will it fit a really tight corner?The narrow 3/4-inch base is built for tight corners. If space is extremely limited, send a photo and we'll confirm or adjust the base length. ✔ Replacement Guarantee — The Right Part, Guaranteed Send a picture of your install area and your doorbell BEFORE you order. We’ll send you the exact link to what you need. If you order and it doesn’t fit, we’ll send the correct part at NO ADDITIONAL COST. Before you order: Text or email pictures of (1) your install location and (2) your doorbell. We’ll confirm the exact product/variant that fits and send a direct link. If the part doesn’t fit: Send a picture of the doorbell and how the part doesn’t fit. We’ll ship the correct replacement at no extra cost. How to send pictures: Text/email 833-326-6868 / shop@doorbellmount.com. This guarantee covers fitment issues only. We can’t replace parts damaged during install. Need to Buy the Doorbell or Install Tools? Ring Video Doorbell 2 on Amazon Install tools & supplies: #1 Phillips PRECISION screwdriver — for the small bracket screws #2 Phillips screwdriver — for the #6 wall screws Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. These small commissions help fund development of new mounts and brackets. Questions? Not Sure What You Have? Send pictures — we’ll confirm before you order: Email: shop@doorbellmount.com Text/Call: 1-833-326-6868 Standard Color: Black. For trim-matching prints, use the Color Change Request. Shop the full range at DoorbellMount.com. 3D-Printed Parts Note: Each mount is 3D-printed to order in UV-stable PETG. Minor layer lines are normal and do not affect strength or fit. Black is standard; custom colors via the Color Change Request. Grab your 45° Corner Mount for the Ring VDB 2 today — slim 3/4" corner base, customizable hole spacing and length, free shipping over $100, and our Replacement Guarantee.