45° Corner Doorbell Mount for SimpliSafe 2K Series 2

Corner Mount Angled 45° for the SimpliSafe 2K Series 2 Video Doorbell (2K, Wired, 2026) — Slim Fit for Inside & Outside Wall Corners ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee✔ Photo-Verified Fit Set your SimpliSafe 2K Series 2 Video Doorbell on a wall corner and turn it 45° toward the people walking up. The 3/4-inch base slips onto tight inside or outside corners and skinny trim where a standard mount rocks or overhangs. The doorbell bracket on this mount is shaped for one specific SimpliSafe doorbell. Choose SimpliSafe 2K Series 2 or SimpliSafe 1080P in the Doorbell Model dropdown and we print the bracket made for that doorbell. Printed to order in the USA from UV-stable PETG. Free shipping over $100, backed by our Replacement Guarantee. Two SimpliSafe doorbells, two different brackets. The SimpliSafe 2K Series 2 and the SimpliSafe 1080P (the original Video Doorbell Pro) have different backs, so each one gets its own bracket. Select yours from the dropdown above before adding to cart. Which SimpliSafe Doorbell Is This Corner Mount For? SimpliSafe 2K Series 2 Video Doorbell (2026) — 2K video with a 150° head-to-toe view and dual-band Wi-Fi. Wired, 16-24V AC; requires a SimpliSafe Base Station and Keypad. Buy on Amazon → SimpliSafe 1080P Video Doorbell (2020) — The original SimpliSafe Video Doorbell Pro (VPD301) — 1080p HDR, 162° view, wired. Buy on Amazon → Important: Each doorbell uses a different bracket — select your model in the Doorbell Model dropdown. Not sure which SimpliSafe you have? Upload a photo of your doorbell with the photo upload option on this listing — we confirm it before shipping. Still need the SimpliSafe 2K Series 2? Get the SimpliSafe 2K Series 2 Video Doorbell on Amazon → Corner Mount Angled 45° — Standard Dimensions Base Width: 3/4 inch (narrow) — fits tight inside/outside wall corners and narrow trim Total Length: 2.5 inches standard Hole Spacing: 2 inches center-to-center standard — fully customizable (see note below) Corner Angle: 45° fixed — turns the doorbell out from the corner toward the walkway Offset from Corner: ~1 inch projection What’s Included: narrow corner base (sizing embossed on the wall side) + 2× #6 wall screws + the SimpliSafe bracket for the model you select Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant Price: $39.50 Need a different hole spacing? Hole spacing on this base is printed to order. If your wall has existing holes that don’t match the standard 2", we can print it to your exact spacing — 1-3/8" up to 4-1/8", including slotted holes: Customize Hole Spacing for Mounts → Key Features & Benefits 45° Corner Aim: Mounts on an inside or outside corner and points the 2K camera at the door approach. 3/4" Narrow Base: 2.5 inches long — sits flat on tight corners and narrow trim. Bracket Made for Your Doorbell: Pick 2K Series 2 or 1080P; the bracket is printed for that model. Custom Hole Spacing & Length: Match existing holes (1-3/8" to 4-1/8", slotted) or change the base length. Outdoor PETG: UV-stable and freeze-tolerant, 3D-printed in the USA. Customization & Add-Ons Custom Hole Spacing: Any spacing 1-3/8" to 4-1/8", slotted available — Customize Hole Spacing for Mounts → Change Base Length: Lengthen or shorten the corner base — Change Base Length for Fixed or Corner Mount → Add Extension Distance: Push the doorbell farther off the corner, 1/2" to 7" — Add Extension Length → Different Corner Angle: We also make 15° and 30° offset corner mounts and an Adjustable Corner Mount (0-90°). Color: Default color is Black. Pick another color in the color options on this page. Installing Your 45° Corner Mount on a SimpliSafe Doorbell Select your doorbell: Confirm whether you have the 2K Series 2 or the 1080P and choose it in the dropdown so we print the matching bracket. Disarm first: Disarm your SimpliSafe system first — pulling the doorbell can trigger a tamper alert. Remove the old doorbell: Switch off the doorbell breaker, take down the old doorbell and disconnect its two 16-24V AC wires. Position the 45° corner base on the inside or outside corner and sight the aim toward the walkway with a level. Anchor the base to the corner trim with the provided #6 wall screws and a #2 Phillips screwdriver (pilot holes optional). Attach the bracket: Attach the SimpliSafe bracket to the mount face with the small center screws (usually preinstalled). Use a #1 Phillips PRECISION screwdriver. Mount the doorbell: Connect the two wires to the SimpliSafe terminals and mount the doorbell onto the bracket with the screws PROVIDED WITH THIS MOUNT (not SimpliSafe’s stock plate). Finish up: Restore power, re-arm, and check the field of view and Activity Zones in the SimpliSafe app. Tools: #2 Phillips screwdriver, #1 Phillips PRECISION screwdriver, drill (optional pilot holes), level, multimeter. FAQ — Corner Mount Angled 45° for SimpliSafe Doorbells Which SimpliSafe doorbells is this corner mount sold for? Two versions are available: one with the bracket for the SimpliSafe 2K Series 2 (2026) and one with the bracket for the SimpliSafe 1080P (Video Doorbell Pro). Each doorbell needs its own bracket, so select the correct one in the dropdown. What are the base dimensions? The base is 3/4 inch wide and 2.5 inches long with 2-inch center-to-center hole spacing (customizable). It holds a fixed 45° corner angle with roughly 1 inch of offset from the corner. Can I change the hole spacing or base length? Yes — both are made to order. Hole spacing runs from 1-3/8 inch to 4-1/8 inch, including slotted holes, and the base length can be changed with the add-on. What if I need a different corner angle? We also make 15° and 30° offset corner mounts plus an adjustable 0-90° corner mount for fine-tuning the aim. How do you make sure I get the right bracket? Upload photos of your doorbell and corner with the photo upload option on this listing. We review them before your order ships. Will it hold up outdoors? Yes. It is printed in UV-stable PETG that tolerates freezing winters and summer sun. ✔ Replacement Guarantee — Photo-Checked Before It Ships Use the photo upload option on this listing to send pictures of your SimpliSafe doorbell and the corner where it will mount. We look at every photo before your order ships so the corner mount and bracket you receive are the right ones — fit guaranteed. Before it ships: Upload photos with the photo upload option on this listing — doorbell and mounting corner. Questions? Text or call 1-833-326-6868 or email shop@doorbellmount.com. Need a SimpliSafe Doorbell or Install Tools? SimpliSafe doorbells: SimpliSafe 2K Series 2 Video Doorbell (2026) — ASIN B0HF1V67GN on Amazon SimpliSafe 1080P Video Doorbell Pro (2020) — ASIN B089PNGL41 on Amazon Install tools & supplies: #1 Phillips PRECISION screwdriver — for the #4 bracket screws #2 Phillips screwdriver — for the #6 wall screws Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. These small commissions help fund development of new mounts and brackets. Questions About Your Corner Install? Upload photos with the photo upload option on this listing, or reach us directly: Email: shop@doorbellmount.com Text/Call: 1-833-326-6868 Color: Black is the default; any other color can be picked from the color options on this page. 3D-Printed Parts Note: Each mount is 3D-printed to order in UV-stable PETG. Minor layer lines are normal and do not affect strength or fit. Black is the default; any other color can be picked from the color options on this page. Order your 45° Corner Mount for the SimpliSafe 2K Series 2 today — slim 3/4" corner base, custom hole spacing, bracket printed for your exact doorbell, photo-checked before shipping.