Copper Compression CopperRed™ Infrared Flex Wrap

660nm red and 850nm near infrared. Copper Compression CopperRed™ Infrared Flex Wrap The CopperRed™ Infrared Flex Wrap is a flexible panel of light sewn into a wrap that straps around a knee, a shoulder, an arm or your lower back. Inside it are 120 LEDs carrying three chips each, 360 chips in total: 120 of them run 660nm visible red light and 240 of them run 850nm near infrared light. The two wavelengths together give balanced coverage for surface level comfort and deeper feeling support. The panel measures 15.75 inches by 8.125 inches, the fabric is flexible and non abrasive, and an elastic strap holds it where you put it. Three illumination modes decide which chips light up: near infrared plus red light, near infrared only, or red light only. Eight intensity steps sit behind the intensity button. Five are steady, at 50, 70, 80, 90 and 100 per cent. Three of them move: a 10Hz pulse, a 40Hz pulse and a breathing mode. The timer runs from 5 to 30 minutes in 5 minute increments and defaults to 20, so a session starts on one press. Copper Compression's claim for the wrap keeps its hedge: it may support circulation, relaxation and post activity comfort. Wavelengths 660nm + 850nm Visible red and near infrared LED Chips 360 120 red, 240 near infrared Illumination Modes 3 Eight intensity steps behind them Timer 5 to 30 min 20 minutes by default 15.75 in. by 8.125 in. 120 LEDs, three chips each Child lock on the M button Power cord or USB boost cord Inside the wrap Two Wavelengths Across 360 Chips Every chip in the panel is one of two colours, and the mode button decides which of them come on. The controller does the rest. 120 Red Chips, 240 Near Infrared The wrap runs dual wavelengths, 660nm visible red light and 850nm near infrared light, to provide balanced coverage for surface level comfort and deeper feeling support. The count behind that is 120 LEDs with three chips each, 360 chips in all, split 120 red to 240 near infrared. Red light you can see. Near infrared light you cannot. 660nm and 850nm Three Illumination Modes One button cycles the panel through near infrared plus red light, near infrared only, and red light only. The choice is yours on every session, and it is the setting that changes what the wrap is doing more than any other. Intensity and the timer sit on their own buttons on the same controller. 3 illumination modes Eight Steps of Intensity Five of the eight steps are steady output at 50, 70, 80, 90 and 100 per cent. The other three move: a 10Hz pulse, a 40Hz pulse, and a breathing mode that rises and falls across the session. A steady setting and a pulsing one are a button apart. 8 intensity steps The Timer, the Lock and the Power The timer moves in 5 minute increments from 5 minutes to 30, and it sits at 20 minutes until you change it. Holding the power button for two seconds turns the wrap on and off. Holding the M button for two seconds sets the child lock, so the controller stops answering until it is held again. 5 to 30 minutes The specification What the Wrap Carries One version of the wrap, one controller, and every mode on this list reachable from it. 660nm red light on 120 chips Visible red 850nm near infrared on 240 chips The other two thirds 120 LEDs, three chips each 360 chips in total Three illumination modes Red, near infrared, or both Eight intensity steps Five steady, two pulsed, one breathing Timer from 5 to 30 minutes 20 minutes by default Child lock on the M button Held for two seconds 15.75 in. by 8.125 in. panel Flexible, non abrasive fabric Closer look The Light, the Controller and the Fit The light Which Chips Are Lit, and When The panel holds 120 LEDs and each one carries three chips, which is how a wrap this size reaches 360 chips in total. Of those, 120 emit 660nm visible red light and 240 emit 850nm near infrared light, a two-to-one split in favour of the wavelength you cannot see. The illumination mode decides which group is working: both together, near infrared on its own, or red on its own. 120 LEDs with three chips each 360 chips in total 120 chips at 660nm visible red 240 chips at 850nm near infrared Three illumination modes 660nm red 850nm near infrared 360 chips The controller Everything Runs From One Handset The wrap has no controls on it. A handheld controller sits on the cord and carries all of them. Power comes up on a two second hold, and the rest are illumination mode, intensity and timer. A child lock sits on the M button, held the same two seconds. Intensity climbs in eight steps, the first five steady at 50, 70, 80, 90 and 100 per cent and the last three moving, a 10Hz pulse, a 40Hz pulse and a breathing mode. Power button held two seconds M button held two seconds for the child lock Intensity at 50, 70, 80, 90 and 100 per cent 10Hz pulse, 40Hz pulse and breathing mode Timer in 5 minute increments 8 intensity steps Child lock 5 minute increments The fit Knee, Waist, Arm, Shoulder, Back Sized at 15.75 inches by 8.125 inches, the panel adapts well to common areas like the back, shoulders, arms, legs, knees, neck, and stomach. The fabric is flexible and non abrasive, so the wrap bends around a joint and holds the curve, and an elastic strap holds the position while you move. Power comes through a power cord or a USB boost cord, so where you sit is decided by the outlet or the battery pack you plug into. Use it at home as part of your daily recovery routine to support circulation, relaxation, and overall comfort. 15.75 inches by 8.125 inches Flexible, non abrasive fabric Elastic strap included Back, shoulders, arms, legs, knees, neck and stomach Power cord or USB boost cord Elastic strap Flexible panel Corded power Compare The Three Powered Products Copper Compression Makes One covers a whole joint in red and near infrared light, one works a single spot under a hand-held pot, and one puts heat and vibration into both hands at once. You're Here CopperRed™ Infrared Flex Wrap The only one of the three that carries 850nm near infrared alongside the red, and the only one that straps on and stays put. 660nm and 850nm 360 LED chips 3 illumination modes Timer to 30 minutes Currently viewing CopperRed™ Cupping Device A cordless pot that grips with suction and adds heat across twelve settings, with 660nm red light and no near infrared. 660nm red light 12 suction settings 12 heat settings 20 minute timer Shop the CopperRed Cupping Device CopperVibe™ 2.0 Gloves No light at all. Heat and vibration in a copper-infused glove, in two sizes, with a 90 day warranty behind them. Heat and vibration Multiple modes for each Two sizes 90 day warranty Shop the CopperVibe 2.0 Gloves Questions Working the Handset What wavelengths does the wrap run? + Two: 660nm visible red light and 850nm near infrared light. The red sits on 120 chips and the near infrared on 240. How many LEDs are in the panel? + 120 LEDs, each carrying three chips, for 360 chips in total. The chip count is the figure worth comparing between wraps, since one LED can hold one chip or several. What are the three illumination modes? + Near infrared plus red light, near infrared only, or red light only. One button moves between them. What are the eight intensity steps? + Five steady settings at 50, 70, 80, 90 and 100 per cent, then three that move: a 10Hz pulse, a 40Hz pulse and a breathing mode. How long can I set the timer for? + The timer runs from 5 minutes to 30 and moves in 5 minute increments. It sits at 20 minutes unless you change it, so the wrap is ready to start without setting anything. Is there a child lock? + Yes. Hold the M button for two seconds and the controller stops answering until you hold it again. How do I turn it on? + Hold the power button for two seconds. The same hold turns it off. How big is the panel, and where does it fit? + 15.75 inches by 8.125 inches. It adapts well to common areas like the back, shoulders, arms, legs, knees, neck, and stomach, and the elastic strap holds it in place on a limb. What powers it? + A power cord or a USB boost cord. Those are the two ways it draws power, and the handheld controller sits on the cord. What comes with the wrap? + The wrap itself, the handheld controller, an elastic strap and a printed instruction sheet.