CoolNet Pro Fogger 4 nozzles without Check Valve

Netafim CoolNet Pro Foggers produce finer droplets allowing quicker evaporation resulting in higher humidity for propagation applications. LOWER COST Our CoolNet Pro Foggers are affordably priced – much less than high pressure fog systems. HIGHLY UNIFORM APPLICATION With an operating pressure range of 45 to 60 psi, these foggers produce an average droplet size of 65 microns (at 60 psi) each and every time. This creates a “blanket of fog” or zone of saturated humidity ideal for rooting. Each nozzle of the 4-Way Fogger has a flow rate of 2.0 GPH. DEPENDABLE OPERATION Since the CoolNet Pro Fogger operates on low pressure, there is significantly less wear on the fogger components resulting in less maintenance and reduces overall operating costs. Our fogger system requires 140 mesh filtration eliminating costly filtration systems with intensive maintenance issues. Fogger blockers are available to close off one or more nozzles of the assembly when needed. SIMPLE INSTALLATION AND DISASSEMBLY CoolNet Pro Foggers are readily adaptable to existing systems. They are easy to install with fittings common to most hanging assemblies. All it takes is a “twist” and the fogger nozzle can be removed from the center assembly – no tools needed. RELIABLE CHECK VALVES Assembled above the CoolNet Pro Fogger head is a high pressure check valve. This check valve ensures that each fogger turns on and off at exactly the same time for effective short cycling. It also prevents water from draining onto the plants or cuttings below after system shut down. COOLNET PRO FOGGER WITH CHECK VALVE Produces a flow rate of 8.1 GPH at 60 psi and has four removable nozzles for easy disassembly and cleaning. Standard check valve has purple pin – opens at 28 psi and closes at 13 psi. Optional check valve with orange pin – opens at 58 psi and closes at 26 psi. Check valve provides instantaneous on-off and prevents line drainage.