Contoured Holster Belt

Why a contoured gun belt? Simple... because they're so comfortable, and so well-suited to the female body shape! The contour helps the belt to lie flat and to not gape in the back. This contoured gun belt has a 2-inch contour, is 1.5" wide and made from Premium USA single-layer bull hide that is not glued, laminated, or stitched together (the stitching is just for looks). It's guaranteed to never split or come apart.  The Chicago screws and fasteners make it easy to change the buckle, if you prefer a different look. Black belts have a solid stainless steel buckle and brown belts have a solid brass buckle.  Made in the USA! What Size Should You Order? 1. Lay out a belt that you currently wear  2. Measure from where the leather wraps the buckle to the hole that you currently use when you wear your belt (see pic below) 3. Add 4 inches to your measurement - that is the size you should order Don't have a belt to measure on? 1. Put on a pair of jeans or pants that you wear frequently. These pants should not be too loose or too tight so that you will be able to get an accurate measurement of your waist. 2. Thread a fabric measuring tape through the belt loops of the pants. Pinch the two sides together where they meet in front. This number will be your normal waist measurement. 3. Check to make sure that the measuring tape is in the middle or bottom of the belt loops, instead of flush with the top. 4. Read the measurement in the mirror or mark the point where the two sides of the measuring tape meet with a safety pin. Remove the tape from the loops and read the measurement. Add 3 inches to the measurement for OWB (outside the waistband) or 4 inches to the measurement for (IWB) inside the waist band. This is your belt size.