Conquer All Volume II - Impulse Response Pack

Get ready, because this pack is about to blow your current tone out of the water. If you're still struggling with muddy, dark, or even boring as plain potato-chip tones, Conquer All is here to spark new life into those old and dusty tones. Not sure what an Impulse Response is? Click here. Conquer All Vol. 2 is a set of ALL NEW 136 unbelievable Impulse Responses (68 raw & 68 mixed) made with: 2 Class A Preamps 3 New Cabs 4 Different Dynamic Microphones Equipment used for capturing IRs includes: Peavey 6505 (120W, 6L6 Tubes) Marshall 30th Anniversary Edition 6100 (100W, EL34 Tubes) Zilla Fatboy (2x12, Custom, Celestion Vintage 30 & Creamback) Blackstar Series One (4x12, Standard) Orange PPC112 (1x12, Standard) API 312 (Classic design using 2520 op amp) Don Classics NV73 (Neve 1073 clone) Shure SM57 Sennheiser MD421 Beyerdynamic M201 Sennheiser e906 Every impulse in this pack was meticulously phase-aligned and level-matched not only with each other, but with the original Conquer All – IR Pack as well, providing convenience and true neutrality when comparing IR options. Special thanks to Ryan "Fluff " Bruce and Francesco Filigoi for the awesome guitar-only examples. Ryan "Fluff" Bruce checked it out and here's what he had to say: All impulses are available mix-ready and raw, allowing you to add as much (or as little) coloration as you want when dialing in the perfect sound. Check out some of the many sounds available in our demos below: Includes 68 Raw & 68 Mixed IRs in .Wav Format. Heads used: Peavey 6505 (120W, 6L6 Tubes) Marshall 30th Anniversary Edition 6100 (100W, EL34 Tubes) Cabs used: Zilla Fatboy (2x12, Custom, Celestion Vintage 30 & Creamback) Blackstar Series One (4x12, Standard) Orange PPC112 (1x12, Standard) Preamps used: API 312 (Classic design using 2520 op amp) Don Classics NV73 (Neve 1073 clone) Microphones used: Shure SM57 Sennheiser MD421 Beyerdynamic M201 Sennheiser e906 More Info Impulse Responses created by Michael Richards of Trackmix Recording Studio. Impulse Response loader and any amp or simulator (See manual for details). Looking for more? Check out these other great IR packs: Conquer All Volume I Conquer All Volume III Conquer All Volume IV Conquer All Volume V Conquer All Bundle Requirements A computer with Intel or AMD compatible processor, Windows or Mac OSX operating system, and a compatible DAW installed (check which plugin formats your DAW supports). Note: For Kemper compatibility, users are required to please down-sample the .wav's to 44.1kHz, 16/24-bit in your DAW or via a sample rate conversion utility or application, and then run Cab Maker to reprocess for import. Windows (32 & 64 bit) Mac OSX (32 & 64 bit) Note: For Kemper compatibility, users are required to please down-sample the .wav's to 44.1kHz, 16/24-bit in your DAW or via a sample rate conversion utility or application, and then run Cab Maker to reprocess for import. Legal Copyright © 2015 Joey Sturgis Tones. All rights reserved. Mac OSX is a trademark of Apple, Inc. Windows is a trademark of Microsoft, Inc.