Concorso Gloss Sealant Glaze

Gloss-It Concorso Gloss Sealant Glaze final finish has been a trade secret in the Gloss-it family for the past 10 years. Concorso Gloss has won more best of show events than any competing carnauba wax available. Our flagship gloss offers the ultimate in depth, clarity, color enhancement and brilliance. Concorso Gloss is safe for conventional clear coats, single stage paint, and Nano Ceramics. Body shop safe! Concorso Gloss works excellent both by hand and machine. For unsurpassed results use our Gloss-it Dual Head Orbital Polisher with Gloss-it Blue Foam Finishing Pads. Instructions Wash and clean vehicle paint finish with Gloss Car Wash Shampoo before applying Concorso Gloss. Check paint finish for any remaining contamination (tar, metal particles, or fallout). If contamination is found use our Gloss-it clay bar with Gloss Enhancer before applying Gloss Finish. Best results are achieved with Gloss-it Evolution Polish and Gloss Activator before applying Concorso Gloss. Shake well before applying Concorso Gloss on a cool and cured surface. Apply in shaded area and if possible avoid direct sunlight. Cyclo or 7424XP Porter Cable Polisher Application: Apply bead size amount on each foam pad. Be sure to rub product into pads to help prevent slinging. Spread polish over the panel evenly with buffer turned off. When using polisher, start on top panels first then proceed to lower panels. Work orbital polisher in small 2' x 2' sections. Apply 5 to 10 pounds of pressure then ease up pressure as imperfections are being removed. Use criss-cross pattern overlapping from vertical to horizontal direction. Buff until product is no longer visible and defects are removed. Side Note: Use Gloss-it ultra plush micro fiber towel and Gloss Enhancer to remove any additional residue.