Comp-Style SCX10/SCX10 II Front Bumper with Stinger

Fits the following bodies, and may fit others (bumper sits even with top of frame rails and offers some fore/aft adjustment): -Jeep Wrangler -Pro-Line SR5 (with the stock plastic bumper) -Pro-Line Jeep Wrangler -G6/Deadbolt -CRC Jeep Wrangler Unlimited -Pro-Line Racing 46 Power Wagon With over 50 possible combinations on to choose from on this bumper, you can truly build the perfect piece of trail armor for your needs. If you weren't a competitor already, our Comp-Style Front Bumper w/ Stinger will allow you to push the limits of your SCX10/SCX10 2 without having to worry about approach angles. Drive OVER the rocks, don't work around your bumper! RC Scale Welded Steel Ultra Low-Profile Comp-Style Front Bumper w/ Stinger for Axial SCX10/SCX10 II Jeep Rubicon, CRC Wrangler Unlimited, Deadbolt/G6, etc. **If using on the Pro-Line SR5 body, this is made to fit WITH the stock plastic Bumper for a bull-bar look. For a raised bumper that requires trimming of the plastic bumper, please see our other SR5 listings. Sits even with the top of the frame rails. For RAISED brackets (+20mm above top of frame rails), see our selection HERE Specifications: - Finished width 79mm wide (74mm standard scx10 bracket width) - 20mm deep top plate w/ approx. 12mm of fore/aft adjustment. - Bumper fits tight to the frame for the best approach angle possible. - Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories) - Steel construction - Hand Made/Welded. - Can be drilled to accept winch.   **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:   -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own, -Flat Black: Superficial matte black coating, will scratch under normal use. -Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. *Recommend hardware mounting kits available at the top of the page as an optional add-on.** Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.