Husqvarna 9 Bu 3-Bag Collector w/ Blower 966793003 | 61" Fab | DISCONTINUED

Husqvarna Collection System, 9 Bushel 3-Bag with Blower, 61" Fabricated Deck, Part # 966793003 | New | DISCONTINUEDThe Husqvarna 966793003 is a 9 bushel three bag collection system with a heavy duty deck mounted blower assembly, built for 61 inch fabricated decks on M-ZT and CZT series commercial zero-turns. The blower is what separates this from a gravity bagger: it moves wet grass and leaf load through the chute instead of letting it pack. Husqvarna has discontinued this part number. ⚠ DISCONTINUED BY HUSQVARNA Part number 966793003 is listed as no longer available through Husqvarna's parts channel. When remaining stock is gone there is no factory replacement under this number. Bags and wear items may become difficult to source over time. ⚠ DRIVE KIT: NOT LISTED AS REQUIRED, BUT CONFIRM FOR YOUR MACHINE Husqvarna's collection system accessory catalog lists a required drive kit for some blower assisted systems (for example the 54/60 inch Z500 series system 967322601 requires drive kit 966407101 or 966407201) but does not list a drive kit for 966793003, and a dealer listing for this part states a drive kit is not required. The blower assembly is included with the system. We could not verify this against an installation manual, so confirm with your Husqvarna dealer against your model and serial number before ordering.Specifications Part Number: 966793003 Also Known As: Collector, zero turn, 9 bu, 3 bag, with blower, M-ZT 61 Brand: Husqvarna Capacity: 9 bushels (approximately 315 to 318 litres) Bags: 3 Deck Size: 61 in fabricated deck Blower: Heavy duty deck mounted blower assembly, included Dump Mechanism: Manual, quick release bags Status: Discontinued Condition: New What's Included Three bag collection system, 9 bushel total Deck mounted blower assembly Mounting hardware Key Features Deck mounted blower assembly. Increased airflow is what lets a 61 inch deck keep feeding a collector in heavy or damp material. 9 bushel across three bags. Commercial volume without a single bag that is too heavy to handle. Quick release bags. Bags come off the frame for emptying without dismantling the collector. Built for fabricated decks. Matched to the 61 inch fabricated deck outlet rather than adapted from a stamped deck design. Commercial duty materials. Specified for professional cutting schedules rather than occasional homeowner use. CompatibilityConfirmed fitment: Husqvarna commercial zero-turns with the 61 inch fabricated deck, catalogued for the M-ZT 61 and CZT 61. Husqvarna's accessory catalog lists companion systems for other deck sizes (52 inch is 966793002, 61 inch RZT61X is 966793101), so check the number against your machine. Always verify against your mower model number and serial number before purchasing. Why Buy OEM?Genuine factory parts are built to the original engineering drawings, so brackets line up, belts run at the designed tension and the collector seals to the deck the way it was tested to. Aftermarket substitutes for collection hardware are a common source of thrown belts, blown seals and clogged chutes. OEM protects both the fit and any remaining machine warranty. Discontinued NoticeHusqvarna has withdrawn 966793003 from its parts channel. Remaining new stock is finite and there is no factory successor under this number. Dealer asking prices for this system have run in the region of 2,000 to 2,300 US dollars where inventory can still be found, and availability continues to thin. If you run a 61 inch fabricated deck machine and want a factory blower assisted collector, this is the correct number to secure now. Shop With Confidence ✔ Genuine Husqvarna OEM collection system ✔ 9 bushel, 3 bag, with heavy duty deck mounted blower ✔ Discontinued part, new old stock ✔ Sold by an authorized Husqvarna dealer ✔ Drive kit status stated honestly, not guessed ✔ Fast Shipping - Ships Quickly from the USA Keywords966793003, Husqvarna 966793003, M-ZT 61 bagger, CZT61 collection system, 9 bushel triple bagger, 61 inch fabricated deck bagger, blower assisted collection system, commercial zero turn bagger, discontinued Husqvarna bagger, 3 bag grass catcher, zero turn collector Please verify compatibility before purchase. Confirm this part number against your mower model number and serial number, and confirm with your dealer whether any additional drive or mounting kit applies to your machine. This part is discontinued and is sold as new old stock. Message us with your model and serial number and we will help you check.