Coffee Latte Iron On Embroidery Patch

These Patches can be applied to denim, 100% cotton, and polyester/cotton blends on light and dark colored garments. They can be applied to robes, hats, bags, t-shirts, sweatshirts and so much more! Size (Approx): approximately 2 inch tall by 1.75 inches wide. These particular patches cannot be applied to any type of surface that would melt when high heat is applied to it. The patches can be applied with an iron or a heat press. 𝐈𝐫𝐨𝐧 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐈𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧𝐬: • When applying the patches with an iron, set your iron to high heat. • Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your patches prior to prepressing to remove any lint. • Pre-press your garment where patches will be applied for 10-20 seconds. • Position patches on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.) • Press firmly straight down onto patches for 45 seconds in place. Do not move iron back and forth. • Turn your garment inside out and press firmly straight down for 30 seconds in place. • Let area cool for 60 seconds. If your patches do not fully adhere, then repeat Step 5. 𝐇𝐞𝐚𝐭 𝐏𝐫𝐞𝐬𝐬 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐈𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧𝐬: • When applying the patches with a heat press, set your heat press temperature to 310 degrees Fahrenheit, the timer to 20 seconds, and the pressure to medium. • Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your patches prior to prepressing to remove any lint. • Pre-press your garment where patches will be applied for 3-5 seconds. • Position patches on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.) • Press patch for 20 seconds. • Turn your garment inside out and repeat Step 5. • Let area cool for 60 seconds. If your patches do not fully adhere, then repeat Step 5.