CNC Single Part Setup Fee

This service covers the setup and programming for one component of your call, either a barrel or an insert. If you need both parts programmed, please select a quantity of two. A Delrin sample will be machined and shipped within 1–2 weeks for your approval. Barrels (Duck & Goose) Interior boring Exterior profile turning Band tenon with glue grooves or goose insert tenon with O-ring grooves Note: Barrels exceeding 3.25” in length may incur additional machining fees due to increased production time. Duck Inserts Tone board channel boring (depth-specific) Exterior profile turning Reaming of exhaust, tone board tenon, and O-ring grooves (if applicable) Recommended: Tone board tenon length of 2.10” for optimal performance. Custom Options If you only need profile turning with a 1/2” or 5/8” bore for a sleeved tenon, let us know. Reduced machining time may qualify for per-piece cost savings. For sleeving materials, we recommend Pintail Waterfowl. Important Notes Tone board milling is not currently offered. Our goal is to deliver an insert that’s ready for you to drop into your jig and begin tuning immediately. Parts will come off the CNC with a fairly smooth finish. For a true glass-like finish, wet sanding and polishing are recommended. Submitting Your Design Please provide one of the following: A physical sample of your call, or A detailed blueprint (a dimensioned sketch is perfectly acceptable) If you send a physical sample, it will be returned with your order. Only with your written permission will we keep your sample on hand for future reference and customer showcase. Please ship a sample of your call or provide a detailed blueprint,(a sketch with measurements will suffice). we will ship it back with the sample... or if granted we can add it to our shop's customer showcase!