Closed Loop Extractor ** ASME Made in USA ** Racked System

Recover Up To 99% of solvents through closed loop extraction Remove ‘Mystery Oil’ No open gases Environmentally friendly Please be advised that other extractors online are not made of FDA approved materials, 710Snob’s stainless steel gaskets, clamps, and end caps are all made from FDA approved materials. This is important to anyone extracting oils for consumption, or for topical applications. These are used for solvent extraction of essential oils from a variety of plants, and to make high quality honey oil. This type of tube, which is made of stainless steel, is the most reliable because it won’t leach chemicals into the product and is even more durable than glass! All items were welded by certified welder Pressure tested and ready to go Do not use this item for illegal purposes Designed for professional extracting power Use outdoors If you’re in the area and in a rush, local pick-up is available: Bozeman MT. Wholesale accounts welcome. Ask your local shop to stock our items. Contact info@710snob.com for special requests. 406-224-3337 316ss interior tube with 304 jacket ASME Made in USA systems ASME Import systems also available  (peer review is a available if needed) In stock with short crate time from our Mesa , Arizona location Consultations are available in Mesa  Arizona or paid travel to your location.  For 20 lbs: (can do upto 80lb material columns on single or dual rack) 2 x 10 lbs material column with jacket Racked collection with bottom drain or shatter platter for easy pour All Swagelok valves Swagelok Gauges and lines Swagelok water lines Includes Cmepol Recovery Pump Dual coil pods Filter stack Heat exchanger Molecular sieve Poly science heater Stainless steel rack (black coated is pictured) 110 lbs water weight at 80% solvent tank ASME Material Socks (for that easy swap out) ASME rated for 310 psi and full vacuum  Hydrocarbon, propane, butane or ethanol For 10 lbs: 10 lbs material column with jacket Racked collection with bottom drain or shatter platter for easy pour All Swagelok valves Swagelok Gauges and lines Swagelok water lines Includes Cmepol Recovery Pump Molecular sieve Dual coil pods Dilter stack Heat exchanger Poly science heater Stainless steel rack (bblack coated is pictured) 110 lbs water weight at 80% solvent tank ASME ASME rated for 310 psi and full vacuum Hydrocarbon, propane, butane or ethanol For 5 lbs: vertical stand alone or racked systems available  10” x 10” collection with handles 10” x 6″ jacketed shatter platter 10” lid with 1.5″ center , two 1.5″ sight glass, Swagelok Gauge, Pressure Release (ASME),  2 x 3/8 valves with JIC ends 1.5” to 4” reducer 1 x 4” x 24” material tubes 2 x 4″ x 12″ material Tubes 4” material tube lid with 3/8″ valve and JIC 4 x 4” high pressure clamps 1 x 1.5” high ressure clamps 2 x 10” high pressure clamp 1 x 96″ braided stainless Ptfe hose with 3/8 JIC ends 1 x 50lb DOT Recovery tank MADE IN USA (tanks are drop shipped from the manufacture) For 1 lbs: Vertical stand alone unit  1 x 6″ x8″ collection chamber Spool 1 x 6″ collection lid with two sight glasses and two 1/4 flare fittings 2 x 6″ viton gasket 1 x 6″ x 2″ shatter platter 2 x 6″ tri clamp High Pressure with Brass Nuts 1 x Reducer 1 x 24” column 2x 3″ tri clamps High Pressure 2 x 3″ gaskets 1 x 1 1/2 inch tri clamp High Pressure 2 x 1/4 ball valve High Pressure for 1000 psi 1 x 3″ cap with Stainless 1/4 flare 2 x 150 micron viton gasket 1 x 72″ stainless braided PTFE line 1 x Swagelok Gauge