ClearSonic IPA78 - IsoPac A78 Drum Isolation Booth Package

The ClearSonic IsoPac A78 is a full drum isolation booth package designed to tame the volume of an acoustic drum kit without hiding the drummer behind a wall of foam. It pairs clear acrylic panels in the front with Sorber sound-absorbing baffles in the rear and lid, giving you a controlled, contained space that still feels open and visible. This is the kind of setup that solves a very real problem for anyone mixing live drums in a room that was never designed for them. What makes this particular model stand out is the use of continuous 78-inch front panels instead of separate height extenders. That means a cleaner sightline to the drummer, faster setup, and one less seam to deal with. The front uses an A2478x7 clear panel, the rear uses three S2466x2 Sorber baffles, and additional Sorber panels line the lower interior of the acrylic to soak up reflections where they build up most. A Sorber lid baffle is added to the standard three-section lid to create a roughly 7-foot wide by 5.5-foot deep covered top. The booth is intentionally designed to breathe. The rear Sorber baffles stand about a foot shorter than the clear panels, leaving open space at the top for air exchange, and the package includes a six-inch clip-on fan to keep air moving for the drummer. ClearSonic rates this configuration at roughly 50 to 60 percent volume reduction thanks to about 128 square feet of Sorber baffling, which is a meaningful drop for a churches stage or a tight studio control situation. For worship teams, schools, theaters, and recording rooms, the practical payoff is simple. Less drum bleed into vocal and instrument mics means the sound tech gains real control over the overall mix. Cable cutouts make it easy to route mic and monitor lines into the booth, and the modular design means you can expand the system later if your needs grow. It is made in the USA and built to hold up to regular use.