CleanFreak® Large Area Dry Strip Oscillating Floor Machine (14" x 28" Head)

This CleanFreak 14" x 28" oscillating floor machine can strip, scrub, and buff in wet and dry environments. It really excels at efficiently dry stripping the top layer of wax off of a floor without using any chemicals. For you to thoroughly remove 100% of the old wax from your floor, you will need to do a full wet strip. This flexible floor machine is a must-have addition to your machine lineup! This machine was so well thought out at the design phase, that it is literally revolutionizing the floor stripping market. The low 9 amp electrical draw allows this machine to start and run in older buildings since the motor can run at lower voltages. The cast iron deck and limited vibration handle make sure you have enough down pressure to do the job, but yet won't vibrate so much that it strains the operator. You've got the great feature of being able to strip floors with no water or other stripping solutions, and one of the most versatile machines available. Our extremely competitive pricing makes it easy to invest in this machine! For some extra down force, we also throw in a 22 lb. weight for FREE. We also offer some optional accessories to purchase with this machine, which are the additional 22 lb. weights, the dust recovery kit, and the replacement isolators kit (Please Note: This larger 14" x 28" machine requires the purchase of 2 isolator kits since it requires 8 total isolators). We also offer a 4-gallon solution tank dispenser if you need to put chemicals down as you work. Any one of these accessories will help you tackle your floor stripping job with ease and professionalism. This machine, along with the smaller CleanFreak 14" x 20" floor machine, come with 1 red spacer pad to be used with other pads so as to not to scrape your floor. For other floor scrubbing options, please take a look at our full line of floor machines and our floor pads. Very Important: A red spacer pad is recommended for use on this oscillating floor machine. If you attach some of the thinner accessories to the underside of your machine, the pad driver will damage your floor. The pad driver has many small pins that hold a pad on - without enough padding those pins will score your flooring. Features Straight lines allow clear pathways and get into corners. Very easy to operate versus a rotary floor buffer (No more fighting to control your floor machine). Minimal vibration in the handle compared to other orbital machines. Cast iron (one piece!) heavyweight chassis for better stripping performance. 3500 RPM orbital speed for better and faster results. Cast aluminum rectangular 14" x 28" pad driver plate. 5" non-marking wheels for easy transportation. Safety switch prevents accidental startup. Non marking full wrap bumper. 5 year warranty on the motor & gearbox, and 1 year on parts & labor (only valid from certified repair centers).