Cleaner Degreaser - Gallon

POR-15 Cleaner Degreaser (formerly marine-clean) cleans and degreases in one application without leaving residues, noxious fumes, or flammable solvents. No other cleaner works as fast or as well. It makes petroleum-based cleaners almost obsolete because POR-15 Cleaner Degreaser can be diluted with water up to 4 to 10 times its volume while remaining more potent than other cleaners. This water-based and non-solvent cleaner removes grease, oil, musty odors, soap films, wax. Use it to clean canvas, vinyl, nylon, holding tanks, grease traps, auto parts, and more. Sorry, your browser doesn't support embedded videos. Adhesion is important with most paints but has to be perfect for POR-15 Rust Preventive Coating to achieve its maximum effectiveness. A solvent wipe before painting didn't work with POR-15 Rust Preventive Coating; in the lab we found it did more harm than good by leaving a residue that didn't help with adhesion or appearance. We had to come up with a substance that would clean metal without leaving a residue. What we developed, POR-15 Cleaner Degreaser, contradicts all accepted theories about metal prep products: its water-based, not solvent-based and it cleans without leaving residues. In laboratory adhesion tests, our POR-15 Rust Preventive Coating using POR-15 Cleaner Degreaser first to clean the bare metal far exceeded every other prep product we found in the marketplace. TIP: When applying to Aluminum or other alloys for clear coating, first test on an inconspicuous area for staining or discoloration. If staining or discoloration occurs, dilute Cleaner Degreaser 50% with water and retest. POR-15 Cleaner Degreaser Technical Data Sheet Applications: Engines Transmissions Grease traps Frames Removes rust stains from porcelain sinks, toilets, and tubs Suspension components Holding and water tanks Galleys Rubber, nylon, vinyl Floor pans Water line scum Fuel tanks Clothing And more… Step 1: Clean it with POR-15 Cleaner Degreaser “We used the POR-15 Cleaner Degreaser to remove any surface oils or other contaminants on the metal. After primer, the correct semi-gloss black paint from POR-15 was applied with a spray gun and compressor on all parts of the frame.” —Rod and Custom Magazine