Class 1 Div 2 Hazardous Location Combo Exit Sign - Explosion Proof

Class 1 Division 2 rated for hazardous locations Explosion-proof design & construction 2 for 1 Solution: exit sign with emergency lights Back (Wall) Mount UL924 Listed   Applications Manufacturing Plants Chemical plants Paint Shops  Gas Stations Moisture, Dirt or Dust Concerns Oil Refineries Wet or Corrosive Conditions   Exit sign module is illuminated by long-life, energy-efficient LEDs. Fully field adjustable lamp head assembly comes standard with a selection of two (2) MR16 halogen lamps for optimum illumination over the path of egress. Lamps are shielded by a cast aluminum housing and a polycarbonate cover Rugged PVC body will not dent, peel or corrode. The sealed faceplate has a heavy-duty, vandal-resistant polycarbonate cover and is fastened with stainless steel tamper-resistant screws. The polyvinyl chloride frame has a built-in gasket to prevent water infiltration. The heavy-duty 1/8” thick aluminum back plate has keyholes for secure wall mount installation Available with sealed, maintenance-free Nickel-Cadmium, or Nickel- Metal Hydride batteries • Fully automatic pulse charger offers 120/277VAC, 60Hz, current limiting temperature compensation, short circuit proof, low voltage battery disconnect, brownout protection and standard solid state transfer feature. The test switch is magnetically operated Advanced Diagnostic circuitry is standard on all Self-Powered models. This circuitry is programmed to ensure the combination unit’s readiness and reliability by continuously monitoring every critical function of the unit. If a problem occurs, a single “Service Required” indicator illuminates immediately. A detailed diagnostic display that will further indicate the nature of the fault is located on the inside of the exit sign, out of sight from the general public. The self test will test the unit for a minimum of 30 seconds every 30 days, 30 minutes every 60 days and 90 minutes annually Designed for wall-mount installation only with a 1/2” electrical conduit entry on both sides and at the top. Evaluated to UL 924 standard and to UL 844 standard for hazardous locations: Class I Division 2, Groups A, B, C and D. A range of lamp ratings are available for different temperature codes 5-year full warranty, excluding lamps and fuses