Clarus Power - Concerto MKII

CLARUS CONCERTO MKII POWER CONDITIONER The Flagship Clarus Eight-Outlet 20-Amp Power Conditioner for High-End Audio Systems By combining rigorous engineering with extensive listening across analog and digital systems, Clarus designed the Concerto MKII power conditioner to reduce electrically induced noise without compromising the musical performance of high-end home audio systems. Instead of pursuing maximum attenuation at any cost, the MKII design targets real-world noise the way it actually propagates through an audio system, preserving dynamic impact, tonal density, and low-level detail. The Concerto MKII is a reference-grade audiophile power conditioner engineered to supply clean, stable AC power to high-performance analog, digital, and high-current audio and video components—ideal for amplifiers, source components, and mixed analog/digital systems that demand low noise and unrestricted current delivery. The MKII features application-specific outlet banks for analog, digital, and high-current components, along with protection and chassis vibration control, and mechanical support for heavy-gauge power cables—built to keep systems quiet, stable, and unconstrained. The Concerto MKII power conditioner uses eight high-performance hospital-grade 20-amp outlets engineered for long-term contact integrity and reliability. Angled at 45 degrees for easy access, each duplex outlet bank and its associated filter circuit are isolated to prevent interaction between connected components. Outlet banks are labeled ANALOG, DIGITAL, and HIGH CURRENT to guide correct component pairing and ensure the intended filtering strategy is applied. POWER CONDITIONING TECHNOLOGY Application-Specific AC Delivery System The Concerto MKII power conditioner’s analog duplex outlet bank connects to a filter topology specifically selected for sensitive front-end electronics, such as phono preamplifiers and line-stage preamplifiers (solid-state or tube). The MKII uses high-permeability, common-mode Clarus FluxCore filtering paired with Ferrite-bead-based filters to reduce ground-referenced noise while preserving unrestricted current delivery—supporting harmonic structure, low-level decay, and dynamic contrast. Oil-filled capacitors further improve thermal stability and long-term reliability. In listening evaluations, they also contribute to improved smoothness, tonal density, and overall musical coherence. Two individually filtered digital duplex outlet banks supply clean power to DACs, network streamers, disc transports, and video components. These outlets use a multi-stage approach that applies differential-mode filtering to address noise between the line and neutral conductors, followed by common-mode Clarus FluxCore filtering to suppress noise referenced to ground, reducing high-frequency interference generated by digital circuitry without compromising performance. The high current duplex outlet bank is engineered as a power conditioner for amplifiers, receivers, powered speakers, and powered subwoofers—components that draw large transient current bursts. The MKII uses common-mode Clarus FluxCore filtering, oil-filled capacitors, and a 30-amp Clarus FluxCore HC inductor as the foundation of the high-current path, paired with ferrite-bead-based filters designed to reduce conducted noise while maintaining unrestricted current delivery during musical peaks. This unique application-specific architecture allows the Concerto MKII to function as a power conditioner for analog and digital audio systems without compromising dynamics or tonal balance. 20-Amp Power Architecture and Star Grounding The Concerto MKII incorporates isolated-ground, 20-amp hospital-grade outlets and a full 20-amp internal power path, allowing it to operate optimally on both 15-amp and 20-amp residential circuits while ensuring that internal conductors, filtering, and power distribution never become a current-limiting factor. When connected to a 20-amp supply, the MKII provides up to 2400 watts of available power (versus 1800 watts on a 15-amp circuit)—offering substantial headroom and reducing power-supply stress during dynamic peaks for both amplifiers and source components. Power is distributed internally using heavy-gauge, tin-plated copper bus bars rather than point-to-point wiring. This low-resistance, mechanically robust approach minimizes voltage drop and supports high transient current demands without sag, helping maintain system stability and dynamic authority under load. A star-ground architecture with isolated ground paths further reduces ground-borne noise and prevents unwanted interaction between connected components. Clarus FluxCore Filtering and Vibration Control for Lower Noise and Higher Stability The Concerto MKII power conditioner’s analog, digital, and high-current filter networks feature Clarus FluxCore technology—high-permeability nanocrystalline core inductors selected to provide strong high-frequency noise suppression while maintaining linear performance under demanding current conditions. This combination helps reduce conducted interference without inserting series resistance or imposing the current-limiting behavior that can flatten dynamics in sensitive analog systems. The selected core materials also exhibit low mechanical noise and reduced vibration-related artifacts, supporting quieter operation in high-resolution. The MKII also addresses mechanical vibration created inside inductive filter elements. Magnetic forces within cores and copper windings can produce low-level vibration during operation. To control this, Clarus applies constrained-layer damping material to the interior of the chassis to absorb vibration at the source and prevent it from being stored or re-radiated within the enclosure. Under/Over Voltage Protection for Safe Operation Audio components can be sensitive to extreme voltage changes. Brownouts and overvoltage events can stress or damage the internal components of connected audio equipment, leading to costly repairs. To provide protection, the Concerto MKII power conditioner includes undervoltage and overvoltage protection with automatic shutdown and recovery to normal operation once safe voltage returns. If the line voltage drops below 90 VAC or rises above 135 VAC, an audible alarm alerts the user when a fault condition is detected. The alarm can be enabled or disabled. Protection Architecture and LED Safety Indicators The Concerto MKII power conditioner incorporates a layered protection system that safeguards audio equipment during fault conditions. A hydraulic-magnetic circuit breaker is employed to protect against overcurrent conditions caused by excessive loads or short circuits. Selected for consistent trip behavior and strong tolerance to inrush current, hydraulic-magnetic protection remains stable across operating temperatures—unlike thermal breakers. Surge protection circuitry and internal monitoring protect the unit in the event of abnormal conditions and automatically shut it down for safety, while a front-panel protection fault LED indicates the status. A highly sophisticated thermal metal oxide varistor (TMOV) provides 960 joules of surge suppression, with an integral temperature sensor that triggers a relay and disconnects power if a critical temperature is reached. Built-In Cable Support The Concerto MKII power conditioner includes a cable support system to manage heavy power cables and reduce strain on outlet connections. Designed for Unrestricted Current Delivery The Concerto MKII power conditioner is engineered to deliver current freely during dynamic demands rather than constrain it—particularly for high-current power amplifiers and other high-demand loads. For best results, use a high-quality power cable appropriate for high-current applications. The Clarus CCP-HC Crimson High Current Power Cable is an excellent choice. Power cable not included (sold separately). Clarus Concerto MKII operation manual SPECIFICATION CONCERTO MKII POWER CONDITIONER ELECTRICAL Line Voltage 120 VAC, 15 A, 50/60 Hz Circuit Breaker Hydraulic-Magnetic Circuit Breaker PROTECTION Spike Protection Modes L–N, N–G, L–G Spike Clamping Voltage (VMAX) 395 V Maximum Surge Current 80 kA (L–N) Maximum Spike Energy 960 Joules (L–N) COMPLIANCE RoHS Compliant Yes CONNECTIONS Outlets 8 High-Performance Hospital-Grade 20 A Outlets AC Input IEC C-20 20-Amp Male Receptacle Ground Connection Ground Terminal DISPLAY Voltage AC Voltage Meter Status (Outlets) Analog Power-On LED, Digital 1 Power-On LED, Digital 2 Power-On LED, High Current Power-On LED Status Grounded Status LED. Polarity Status LED. Protection Fault LED. CONTROLS Front Panel Dimmer Control. Outlet Power Switch. Rear Panel Alarm Switch. AC Main Power Switch. PHYSICAL DETAILS Net Weight 26 lbs Dimensions 3.5 in (H) × 19 in (W) × 12.75 in (D)