Citrus Sheet

Citrus Sheets have a moderate texture (akin to the skin of an orange, hence the name) and provide an extremely sticky surface for you to print on. The coating is a specially developed PEI powder which makes this a workhorse of a print sheet while ensuring superior adhesion compared to other sheets on the market. Specs Color: Shiny black, with orange details Material: 65 manganese/stainless steel Hardness: HRC 50° Sheet Thickness: Precision 0.5mm Coating: PEI Powder coating Coating Thickness: 70-100um Credits Citrus Sheets are based on an original design by Lightweight Labware and were developed in collaboration with Armchair Heavy Industries and RaccoonWorks. Proper Use To achieve optimal results, it's important to adhere to the provided usage instructions. Wait for Prints to Cool: Given that Citrus Sheets are often used with high-temperature materials, it's wise to allow roughly 10 minutes for cooling before attempting to remove the sheet. Exercise caution if removing the sheet immediately after printing, as it will be hot and could cause burns. Gradually cooling the print helps prevent model warping. After both the model and sheet have cooled, you can gently flex the sheet from the edges to detach the model, preparing it swiftly for subsequent prints. Employ a Sharp Scraper for Flexible Materials: Like with most PEI sheets, it is not recommended to print directly on the sheet without a release agent when using flexibles (such as franks goo) Although many prints can be detached without tools, using a sharp scraper is recommended for prints made from TPU or similar flexible materials. This method ensures the model can be gently lifted from the print surface without damage. Cleaning: IPA is acceptable for a quick cleaning. For optimal results, Citrus Sheets should be washed with soap and water between every use.